How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mark Henley Your Own Question
Mark Henley
Mark Henley, Journeyman Technician
Category: HVAC
Satisfied Customers: 3217
Experience:  UA Journeyman Pipefitter , HVAC, Refrigeration, DDC controls. 26 years.Commercial & residential
Type Your HVAC Question Here...
Mark Henley is online now
A new question is answered every 9 seconds

How do you reset the roll out switch on a York Diamond 80.

This answer was rated:

How do you reset the roll out switch on a York Diamond 80. I know where it is, but do you push it, pull it or what? It's not obvious.





If it looks like this one then you press the button in the middle. Let me know if that is what you are looking at,





Mark Henley and other HVAC Specialists are ready to help you
Customer: replied 7 years ago.
It looks like that except that the button in the middle is thin and rectangular with a notch in it rather than cylinder shaped.



It should press in to reset though, it won't be a pullout. You may have more than one.





Customer: replied 7 years ago.
I push the button but it won't stick.