How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mark Henley Your Own Question
Mark Henley
Mark Henley, Journeyman Technician
Category: HVAC
Satisfied Customers: 3217
Experience:  UA Journeyman Pipefitter , HVAC, Refrigeration, DDC controls. 26 years.Commercial & residential
10307865
Type Your HVAC Question Here...
Mark Henley is online now
A new question is answered every 9 seconds

I am trying to replace a Coleman E322P150 blower motor. I

Resolved Question:

I am trying to replace a Coleman E322P150 blower motor. I have found part # XXXXX from BestBuy and American HVAC but neither gives much of a descritption to verify they are the same. I am looking for 1/6hp, 115 volt, 5'diameter, 1050rpm, 7.5 amps, 60hz. It looks to me like a 3/8" diameter shaft, but most are 1/2". Confirming the diameter of the shaft is one of my biggest concerns. Please provide me with any info you can.
Submitted: 8 years ago.
Category: HVAC
Expert:  Mark Henley replied 8 years ago.

Hi,

 

It will be a 1/2" shaft.

 

Thanks

 

Mark

Mark Henley and other HVAC Specialists are ready to help you