How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Honda
Satisfied Customers: 47627
Experience:  16 years of experience
2499435
Type Your Honda Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2008 pilot, had vtm vsa abs on replaced front driver abs,

Customer Question

2008 pilot
JA: Are you fixing your Pilot yourself? What have you tried so far?
Customer: had vtm vsa abs on replaced front driver abs
JA: Have you checked the brake fluid? And have the brakes been squeaking?
Customer: new pad 2k
JA: Anything else you want the mechanic to know before I connect you?
Customer: scan says sensor logic failure ?
Submitted: 6 months ago.
Category: Honda
Expert:  Chris (aka-Moose) replied 6 months ago.

Welcome, I'm Chris (aka Moose), my normal schedule online is around lunch and after dinner till early morning.

Is the scan tool producing any codes in any modules?

Customer: replied 6 months ago.
84-1
Expert:  Chris (aka-Moose) replied 6 months ago.

What are the results from doing this test.

https://dl.dropboxusercontent.com/u/90220402/test84.pdf

Please read this:

  1. Understand it's not one answer and done. We can communicate back and forth many times.
  2. I do not work at or for Just Answer. You and I can only communicate on this page.
  3. When you're pleased or happy with my answer or efforts to help you. At the top of the screen please rate me or reply and say ( I'm pleased.)
  4. When I help you I am only paid from your question value deposit when you rate me on this screen. Rating does not close the post and you're more than welcome to follow up.

Thanks for using Just Answer, Chris

Customer: replied 6 months ago.
i need to do the neutral position cal.shorting pin 9 to ground on the obd and doing the cal did not work.
Expert:  Chris (aka-Moose) replied 6 months ago.

Since my tests did not help I can opt out and let another assist?