How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HondaPlatinum Your Own Question
HondaPlatinum
HondaPlatinum, A Technician
Category: Honda
Satisfied Customers: 11334
Experience:  13 year honda platinum level
3827149
Type Your Honda Question Here...
HondaPlatinum is online now
A new question is answered every 9 seconds

01 Honda CRV multiple misfire on code check Replaced coil,

Customer Question

01 Honda CRV
multiple misfire on code check
Replaced coil, rotor, cap
Now it will not start
Suggestions
Submitted: 1 year ago.
Category: Honda
Expert:  justinsbg replied 1 year ago.

Hi,

My name is ***** ***** I would be happy to help. Does the engine spin over when trying to start?

Customer: replied 1 year ago.
Expert:  justinsbg replied 1 year ago.

Are you sure you installed the wires on the cap in the correct firing order?

Customer: replied 1 year ago.
checked firing order online
Customer: replied 1 year ago.
Would it hurt to flip the rotor 180
Customer: replied 1 year ago.
Should say would it do harm
Expert:  justinsbg replied 1 year ago.

The rotor button will only go on one way. Do you have a multimeter?

Customer: replied 1 year ago.
No sir
Expert:  justinsbg replied 1 year ago.

Was the vehicle running poorly before you replaced the components?

Customer: replied 1 year ago.
Would start first time out in the morningsl idle at 1250
When warm would drop to 500
If you turned it off it didn't want to start again for an hour or so
Customer: replied 1 year ago.
Other than changing parts. Check engine Light was reset
Expert:  justinsbg replied 1 year ago.

Did the engine noticeably misfire along with the low idle?

Customer: replied 1 year ago.
Correct, any attempt to operate the vehicle before the idle dropped and it would stall and not restart
Expert:  justinsbg replied 1 year ago.

Did you replace the Igniter?

Customer: replied 1 year ago.
Expert:  justinsbg replied 1 year ago.

Did you use a aftermarket coil or OEM?

Customer: replied 1 year ago.
OEMAlso replaced broken wire in distributor.
Expert:  justinsbg replied 1 year ago.

With the ignition switch in the ON position does the check engine light come on and stay on after about 1 minute from turning the switch ON?