How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John G. Your Own Question
John G.
John G., Honda Technician
Category: Honda
Satisfied Customers: 2652
Experience:  Dealership tech since 1982. ASE and Honda Master Technician.
Type Your Honda Question Here...
John G. is online now
A new question is answered every 9 seconds

No Comment Added

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Honda
Expert:  John G. replied 8 years ago.

Hi, I can help you with this. I can send directions with some images.

What is the year and model ? engine type?

Customer: replied 8 years ago.
2000 honda accord ex v6
Expert:  John G. replied 8 years ago.
  1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.

  2. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least 3 minutes.

  3. Remove the Automatic Transmission Fluid (ATF) cooler hose from the clamp on the starter motor.

  1. Disconnect the starter cable (A) from the B terminal on the solenoid, then disconnect the BLK/WHT wire (B) from the S terminal.

  2. Remove the two bolts holding the starter, then remove the starter.

  3. graphic


    1. Install in the reverse order of removal. Make sure the crimped side of the ring terminal (A) is facing out.

    1. Connect the battery positive cable and negative cable to the battery.

    2. Enter the anti-theft code for the radio, then enter the customer's radio station presets.

    3. Retest starter performance.

    4. graphic

John G. and 3 other Honda Specialists are ready to help you