How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask acura mstr Your Own Question
acura mstr
acura mstr, Honda Master Tech
Category: Honda
Satisfied Customers: 5338
Experience:  ASE Master tech, , CA smog. ASE L1
Type Your Honda Question Here...
acura mstr is online now
A new question is answered every 9 seconds

how to change wheel studs on honda civic ex 2003

Resolved Question:

No Comment Added
Submitted: 9 years ago.
Category: Honda
Expert:  acura mstr replied 9 years ago.

Hi, welcome to Just Answer. I'm acuramstr. front or rear?

acura mstr and other Honda Specialists are ready to help you
Customer: replied 9 years ago.
Reply to acura mstr's Post: they would be for the front...both sides
Expert:  acura mstr replied 9 years ago.

You will need to remove the hub assy to press the bearing to replace the studs. Here's the procedure . After you remove the hub you will need a press to push the hub from the bearing, most auto parts stores can do this for you . note: this is the correct way to do this. you may hear that you can do it by grinding the studs and notching the back plate but this is a safety issue and i will not recommend that you do this .