How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mr. Gregory White Your Own Question
Mr. Gregory White
Mr. Gregory White, Professor
Category: Homework
Satisfied Customers: 5240
Experience:  M.A., M.S. Education / Educational Administration
Type Your Homework Question Here...
Mr. Gregory White is online now
A new question is answered every 9 seconds

Of these pseudo-instructions, write the MIPS hardware

Customer Question

For each of these pseudo-instructions, write the MIPS hardware instructions that the Assembler would use to implement them.
Do not destroy the values in the source registers. (Use only the minimum number needed.)
abs $s4, $s1 # ***** value; page A-51
Put the absolute value of register $s1 in register $s4
rol $t7, $t3, 8 # ***** left; page A-56 Rotate left
Rotate register $t3 by the distance indicated by 8 and put the result in register $t7.
ld $t5, 0($t8) # ***** double; page A-67
Load the 64-bit quantity at 0($t8) into registers $t5 and $t5 + 1.
Submitted: 1 year ago.
Category: Homework
Expert:  Mr. Gregory White replied 1 year ago.

You need to spend $3 to view this post. Add Funds to your account and buy credits.