How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Home Theater-Stereo
Satisfied Customers: 12294
Experience:  Have been in the business 25+ yrs., down to component level.
13948492
Type Your Home Theater-Stereo Question Here...
Louie is online now
A new question is answered every 9 seconds

I have a sharp cd-dk890 and when I have it on tuner it shows

Customer Question

I have a sharp cd-dk890 and when I have it on tuner it shows tuner and under it tuner cl, how I can I fix this
Submitted: 1 year ago.
Category: Home Theater-Stereo
Expert:  Louie replied 1 year ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, was the Sharp being programmed for preset memory?

Customer: replied 1 year ago.
Expert:  Louie replied 1 year ago.

Have you tried pressing on the ON/STANDBY button to fully turn on the unit?

Customer: replied 1 year ago.
What should I do after it is fully turned on to fix the issue?
Expert:  Louie replied 1 year ago.

If the TUNER CL is displayed, it would be indicate that the entire preset memory, all 40 AM and FM stations in memory have been CLeared.

Have you / can you try re-programming the presets? ...once re-programmed, then instead of CL, P--0# ***** be shown to indicate a particular memory is in use.

Customer: replied 1 year ago.
How do I reprogram then
Expert:  Louie replied 1 year ago.

Please click HERE for the instructions on how to memorize a station.

The instruction sheet is in a Portable Document Format (PDF) file and can be viewed in most web browser. Click on the link to open the file or right click then select “Save As…” to download the file. It would require Adobe Acrobat Reader or equivalent for this purpose.

Customer: replied 1 year ago.
How can I get frequencies displayed
Expert:  Louie replied 1 year ago.

To display the frequency, manual tuning must be done so the display would show something like "TUNER FM 98.8 MHz".

If PRESET ▼/▲ buttons are used, then a station in memory would be automatically tuned to and the display would be something like "TUNER FM - P -- 01 MEMORY".

Customer: replied 1 year ago.
What do I have to do get this of my display
Tuner
Tuner CL
Customer: replied 1 year ago.
I can't get tuner cl to go away.
Expert:  Louie replied 1 year ago.

If TUNER CL is still displayed, then nothing has been programmed into the PRESETS. As posted above and with the instructions provided, please program the PRESETS.

Customer: replied 1 year ago.
No luck still showing tuner
Tuner cl and memory on the right of display
Expert:  Louie replied 1 year ago.

With the unit turned ON and set to TUNER, what happens please if PRESET ▲/▼ button is pressed please?

Customer: replied 1 year ago.
I must have one station on all presets but am not able to see it because
Tuner
Tuner cl still there
Expert:  Louie replied 1 year ago.

Were you able to follow closely/correctly the programming steps above linked?

Expert:  Louie replied 1 year ago.

...any developments?