How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Home Security Systems
Satisfied Customers: 18112
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Home Security Systems Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a bad wireless sensor I want to replace, but I cannot

Customer Question

I have a bad wireless sensor I want to replace, but I cannot enter installer mode with the fault showing
JA: What's the make/model of your device? How old is it?
Customer: ademco lynx r1
JA: How long has this been going on? What troubleshooting have you tried?
Customer: I have removed the faulty wireless sensor and bought a new one
JA: Anything else you want the Security Expert to know before I connect you?
Customer: no
Submitted: 1 month ago.
Category: Home Security Systems
Expert:  Pete replied 1 month ago.

Hi, I'm Pete. Welcome to JustAnswer! I'm reviewing your question now, and will post back with your reply ASAP.

Expert:  Pete replied 1 month ago.

Can you clear the fault, then try again?

What error code are you getting?