How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Billings Your Own Question
Eric Billings
Eric Billings, President
Category: Home Security Systems
Satisfied Customers: 44
Experience:  I have over 35 years of alarm experience, the last 19 years helping folks over the phone and e-mail with their alarm issues. I have been a JA customer since 2011, enrolled as an expert 10/26/15.
Type Your Home Security Systems Question Here...
Eric Billings is online now
A new question is answered every 9 seconds

Static electricity took out my 5322 keypad on my 4180EC

Customer Question

Static electricity took out my 5322 keypad on my 4180EC Ademco security system.
I replaced the keypad (with a 6150 keypad) and purchased another transformer.The keypad still does not work. What should I check next.
Submitted: 7 months ago.
Category: Home Security Systems
Expert:  Eric Billings replied 7 months ago.

The 6150 keypad will not work with the 4180EC panel, you need a 5322 as it is the only keypad that works with that panel.

I found 2 on eBay for about $25 including shipping.

Just because it say's I am ready to be rated doesn't mean our conversation is over, it is merely an option. Please rate me when you feel it is appropriate (that's how us independent contractors get paid), they say the conversation can continue after the rating but I think it is more appropriate for you to wait until we near the end of the project.



Expert:  Eric Billings replied 7 months ago.

here is a copy of the installation guide in case you don't have one