How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Engineer
Category: Home Security Systems
Satisfied Customers: 11737
Experience:  25+ Years Experience in Field. Master Certified Electronics Tech and Technical Consultant
Type Your Home Security Systems Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

I have alarm co23-203 and I lost my how can I fix it : Thank

Customer Question

Hello I have alarm co23-203 and I lost my cod how can I fix it
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Home-Security Technician I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: Thank you
JA: Is there anything else the Home-Security Technician should be aware of?
Customer: No
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Home-Security Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Home Security Systems
Expert:  Michael Hannigan replied 1 year ago.

Hello. Thank you for coming to JustAnswer.

Sorry for the wait. My name is Michael. I will be helping you with your question today.

Expert:  Michael Hannigan replied 1 year ago.

Panel Default Code is 1,2,3,4 for user 1 code. User 2 code is disabled by
User code access levels.
• User 1 code can alter both user codes.
• User 1 code can disable user 2 code. (To disable user 2 code
changed user 2 code to 0000)
• User 2 code has the same setting rights as the user 1 code
• User 2 code cannot alter the user 1 code
If for any reason you loose your code or mistype in a code when changing
it, the installer will need to be contacted to default the panel codes.