How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eddie Your Own Question
Eddie, Home Improvement Contractor
Category: Home Improvement
Satisfied Customers: 776
Experience:  owner of Island Pro-Craft
Type Your Home Improvement Question Here...
Eddie is online now
A new question is answered every 9 seconds

Trying to program my new Clicker KLIK2U to a Chamberlain

Customer Question

Trying to program my new Clicker KLIK2U to a Chamberlain (Lift Master - manufactured in 2002) with a Orange Smart/Learn Button using the Type 4 (ID - *2) instructions.
IC No. 2666A_KE7939
Have watch the video for the type 4 setup.
Have used both ID 2 and * 2, resulting in the 'no' response from the KLIK2U unit.
Have been using the same 4 digital PIN [password] from the beginning.
Have not heard the response of the light / relay.
Would appreciate any help that can be given...
Thanks Hartford Keith
Submitted: 1 year ago.
Category: Home Improvement
Expert:  Eddie replied 1 year ago.

Hi ..........had something else gone wrong before you purchased the Klik..........maybe a power outage and surge...then something didn't work properly?

have you tried changing the pin?

I would like for to clear and then we can reprogram

ERASE THE TRANSMITTERS: hold down the learn button for 6 or 7 seconds

HARD RESET: unplug the opener what should be for a good the meantime remove the batteries from the transmitters including the key less.....and if you have a battery back-up.....plug back in the opener and replace the batteries which should be fresh

Hold the transmitters with-in 16 inches of the opener when you do

Please let me know the answers to the questions and how it goes