How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eddie Your Own Question
Eddie, Home Improvement Contractor
Category: Home Improvement
Satisfied Customers: 730
Experience:  owner of Island Pro-Craft
Type Your Home Improvement Question Here...
Eddie is online now
A new question is answered every 9 seconds

Just left a chat with details of my malfunctioning Genie Pro

Customer Question

Just left a long chat with details of my malfunctioning Genie Pro Screw Drive. I have replaced the receiver board and the wall button due to corrosion. I cannot successfully reprogram the remotes however. The Safe T Beam lights are not on so I suspect a board malfunction.
Submitted: 1 year ago.
Category: Home Improvement
Expert:  Eddie replied 1 year ago.

Hi doc..........are you sure you got the exact part, the logic board that you needed?............even though it is the same company it has to be the right part for the right model........these parts aren't interchangeable.......if you want to check with my parts guy North Shore (###) ###-####/p>



Related Home Improvement Questions