How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian
Brian, Architect
Category: Home Improvement
Satisfied Customers: 2153
Experience:  Licensed Architect- 17 years, L.E.E.D. AP
6457309
Type Your Home Improvement Question Here...
Brian is online now
A new question is answered every 9 seconds

I recently unplugged my garage door opener and when I

Customer Question

I recently unplugged my garage door opener and when I plugged it back in the door won't close without holding the wall button in. The remote will open but not close even when holding button in
. Thanks for your help
Submitted: 1 year ago.
Category: Home Improvement
Expert:  John Contractor replied 1 year ago.

Hello, You Might Have To Reset Or Reprogram Your Lift master the Reset/Reprogram Switch Is Located Where You Put In Your Light Bulb Right On The Middle Track, Hope This Helps, Good Luck

Customer: replied 1 year ago.
I already tried resetting my Lift Master but the issue was not resolve, the wall unit when I push down the button it will open but only goes 1/4