How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc, General Contractor
Category: Home Improvement
Satisfied Customers: 921
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
Type Your Home Improvement Question Here...
Machinc is online now
A new question is answered every 9 seconds

Can not get the doorbell to communicate with the intercom

Customer Question

Can not get the doorbell to communicate with the intercom
Submitted: 1 year ago.
Category: Home Improvement
Expert:  Machinc replied 1 year ago.

If you are sure you have followed the directions for activating

the door bell, learn button till beep . Ten seconds to push learn button on door bell , wait 30 seconds. If this sounds familiar you were in the right area. However there is a sensitivity setting in the four dip switches in the doorbell button. Number three should be moved to off then retry setting up door.bell

Expert:  Machinc replied 1 year ago.

I will be back with more detail in a few moments

Expert:  Machinc replied 1 year ago.

Just want to make sure we are on the same page.

Scrolll down to setting up doorbell.

The beeps are important .

Make sure you hear the first beep then push the learn

button on the doorbell and hold until it beeps .

Must be done within ten seconds.

Must hear both beeps.

Must wait 30 seconds before testing

I will be glad to answer any questions you may have.

Expert:  Machinc replied 1 year ago.

Dont forget to verify the beep at both locations.