How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc, General Contractor
Category: Home Improvement
Satisfied Customers: 921
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
Type Your Home Improvement Question Here...
Machinc is online now
A new question is answered every 9 seconds

I need to replace my garage door springs and found Garage

Customer Question

I need to replace my garage door springs and found Garage Door Nation to be very helpful after watching their youtube video: I am in the process of ordering their torsion spring
replacement kit and their email support has been helpful, but I need a 3rd party opinion on this: Should I change out my garage rollers too? They are metal and a few years old.
Submitted: 1 year ago.
Category: Home Improvement
Expert:  Machinc replied 1 year ago.

While it is possible they are still in good condition They are inexpensive enough to replace. It would be a shame to have one fail after doing all the work you are undertaking. A close inspection of each one may prove they are not worn . I definitely would not reuse any I was unsure of. All of that said I would replace them judt to be safe.

Expert:  Machinc replied 1 year ago.

Check the roller mounts also.