How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc, General Contractor
Category: Home Improvement
Satisfied Customers: 945
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
Type Your Home Improvement Question Here...
Machinc is online now
A new question is answered every 9 seconds

I have an tachi C10LA table saw.It keeps cutting of after

Customer Question

I have an Hitachi C10LA table saw.It keeps cutting of after every few boards I rip.About three or so.I have changed the Circuit Breaker Switch as this has worked one time before.But not now.
Submitted: 2 years ago.
Category: Home Improvement
Expert:  Machinc replied 2 years ago.

Worn brushes in the motor can cause this problem. The motor

has to work harder and overheats. Then of course cools off and will start back. If you have already checked the brushes the winding in the motor could be going open. I will be glad to answer sby questions you may have.