How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc
Machinc, General Contractor
Category: Home Improvement
Satisfied Customers: 913
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
75209918
Type Your Home Improvement Question Here...
Machinc is online now
A new question is answered every 9 seconds

AEG reciprocating saw RSK600 runs only two strokes and then

Customer Question

AEG reciprocating saw RSK600 runs only two strokes and then blade stops. Acts as though something comes out of mesh.
Submitted: 2 years ago.
Category: Home Improvement
Expert:  Machinc replied 2 years ago.
It sounds like you have a gear that has worn
out or has come loose inside the saw.
There are parts available on line.
It will require taking it much further apart than you already
have.
Take pictures as you go and look for a gear that is out of place.
I will post a link of a diagram that is your saw or a similar
model. Let me know if you need a better link.
http://www.toolspareparts.com.au/page/shop/browse_parts/a/category/e/AEG-USE600-Spare-Parts Customer

Related Home Improvement Questions