How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AssuredElectrical Your Own Question
AssuredElectrical, Home Specialist
Category: Home Improvement
Satisfied Customers: 4241
Experience:  35 years home improvement
Type Your Home Improvement Question Here...
AssuredElectrical is online now
A new question is answered every 9 seconds

I have a stanley tt200 garage door opener. I am trying to configure

This answer was rated:

I have a stanley tt200 garage door opener. I am trying to configure this remote with it.

I am having hard time finding the learn smart button on this model of garage door opener. Can you please help me?
Welcome. My name is XXXXX XXXXX would be glad to assist.

I show that one as an older model with the dip switches, no learn button.

Look on your opener and find a set of 10 small slide switches.
Each one will be ON or OFF by the slide
Look real hard for indicator of ON and OFF so there is no confusion on which way the switches are set.

Then set your remote KLIK1U the same way, but be careful because the KLIK1U has a center position possibility and I believe the Stanley only has ON and OFF and no center position.

On the KLIK1U, look at chart B

Your Stanley is the 10 position in chart B

Follow the instructions on the right side of the instructions for Dip Switch settings

Make sure to read the NOTE at the bottom of the page on the right on changes if it doesn't work.

These Universal remotes can be tedious at times.

Original style Stanley Remotes can be seen here if one is needed in the future.

Just reply for any clarification
AssuredElectrical and other Home Improvement Specialists are ready to help you