How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Electrical Engineer
Category: Home Improvement
Satisfied Customers: 7897
Experience:  Expert in electrical & mechanical design, troubleshooting, and problem solving
Type Your Home Improvement Question Here...
Daniel is online now
A new question is answered every 9 seconds

Sears garage door opener Somehow I deactivated the remote controls

Customer Question

Sears garage door opener Somehow I deactivated the remote controls need to know how to reprogram them
Submitted: 4 years ago.
Category: Home Improvement
Expert:  Daniel replied 4 years ago.
Hi there happy to help.

Assuming your opener has a small button on the back(usually square)........

Get a ladder to allow access to this button.

Press and hold this "learn" button for 3-4 seconds. While holding press your remote control button. The remote should now be programmed.

Repeat for additional remotes.

Holding the button on the opener for longer than 15 seconds will erase all codes.

Please don't forget to rate me and have a great day.