Heavy Equipment

Heavy equipment repair questions? Ask an Expert now.

Connect one-on-one with {0} who will answer your question

Related Heavy Equipment Questions
I have a 2004 JD 7420 with IVT transmission. The hydraulic
I have a 2004 JD 7420 with IVT transmission. The hydraulic oil in the sight tube has a foamy look to it when the tractor is in use, what might be the cause?… read more
Rudolph Diesel
Rudolph Diesel
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
Hi I have a 94 cat 312 that had a slow operation and low power
Hi I have a 94 cat 312 that had a slow operation and low power on all hydraulic functions. Also, auto idle kicks down but does not rev back up, and when running the throttle seems to fluctuate up and … read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
Ive got a Cat 277c tracked bobcat in the shop with no bucket
I've got a Cat 277c tracked bobcat in the shop with no bucket controls. I'm mainly trying to find out the meaning of the warning lights that are coming up, but have been unable to get useful info from… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
I have a CAT 312 excavator . shows a code E1 which is low engine
I have a CAT 312 excavator . shows a code E1 which is low engine oil pressure, but appears to be oiling and the idiot light has never came on. Would anything else cause that fault code? it also shows … read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
We are operating a CAT 311B excavator 2003, with serial # XXXXX
We are operating a CAT 311B excavator 2003, with serial # XXXXX without the computer, since it was broken. The traction is on hi gear, and we need to know how to manually pass from hi to low gear.… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
1 metro: stabilizer legs..broken wire..drives..cab level function
I have a cat tele handler 360b and have lost all joystick functions as well as stabilizer legs, boom is sitting about 1 metre of the ground, I have pulled out very panel looking for a broken wire but … read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
How to bleed 99 KUBOTA-M5700 4WD CAB if hydraulic wont work
I CHANGED THE 2 HYDRAULIC FILTERS ON MY M5700 KUBOTA. FILLED WHITH OIL LET IT RUN 10 MIN. NOW NONE OF MY HYDRAULICS WILL WORK. I GUESS AIR GOT INTO IT. HOW DO I BLEED IT 4WD CAB? Optional Information:… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,030 satisfied customers
light comes..during starting, cannot use front end hydraulics
Cat 262C S#MST02196 with 235 hrs. Driver alert light comes on during starting, cannot use front end hydraulics. Machine will move forward/backward. No other indicators stay lit after start. Can let ma… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
I have a Thermo King Tripac and it has an engine code but the button
I have a Thermo King Tripac and it has an engine code but the button does not need reset and the engine will not attempt to start. Any Ideas?… read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
3,131 satisfied customers
hitachi ex58mu and the Hydraulics seem to low in power..Oil levels
I have a Hitachi EX58Mu and the Hydraulics seem to low in power, engine is fine. The machine has been sitting for over 12 months. Oil levels are good. Sometimes seems to work as expected, it also appe… read more
Jeff
Jeff
High School or GED
325 satisfied customers
have coolant in the gearbox oil..new boot seals..water to leak
I seem to have coolant in the gearbox oil of my Landini 6860 Tractor perkins diesel. I drained the oil and replaced it and put new boot seals on the gear sticks. They were very perished and I though s… read more
Benjy
Benjy
Bachelor's Degree
273 satisfied customers
I was working on a Cat 315b and had some info sent to me
Hi Donnie I was working on a Cat 315b and had some info sent to me but need more info. Can you help me with it? I have a post on just answers just haven't had a reply. Thanks… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
Ford: tractor..its power steering..steering wheel..hydraulic
My Ford 4001 tractor (1972 I believe) has through the last two years little by little lost it's power steering. When I tried to use it during the very cold period last week the steering wheel was very… read more
Curtis B.
Curtis B.
Retired service manager
Associate Degree
3,517 satisfied customers
ECM..off...there was a push -pull cable attached to the throttle
Donnie....Can the ECM be tested if it is completly off the machine...It is off.. there was a push -pull cable attached to the throttle in order to move it around.. I want to get it going again the way… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
Excavator..local dealer..cables..1-10 smoothly one notch at a time
I have a Cat 312 Excavator, 1995, 7DK05263 (Grey market) The local dealer looks up a 6GK serial I believe (parts have always fit fine) The throttle actuator quite working, I took apart the cables and … read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
2004 287 multi terrain loader when i..slowing down..filters..hydraulic
i have 2004 287 multi terrain loader when i operate it the travel starts slowing down all the hydraulics are very strong except for the tram the longer i run it the weaker it gets i have changed all f… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,299 satisfied customers
dip stick..my overflow hose off of the valve cover
I have a compact 4500 tractor. I would like to know where to fill the hydraulic system. I used the oil fill spout next to the dip stick after rebuilding my pump, and I appear to have hydraulic fluid c… read more
mitchell
mitchell
mechanic
High School or GED
26 satisfied customers
Disconnected..the tractor will not accelerate and none..hydraulic
I have a New Holland TG255 tractor that has developed a message on the computer control center that is telling me that it has lost communication with the computer. What led to this was when i disconne… read more
ed427red
ed427red
Vocational, Technical or Trade Scho
4 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Chris (aka - Moose)

Chris (aka - Moose)

Technician

113 satisfied customers

16 years of experience

Tim

Tim

Foreman

338 satisfied customers

23 Years Heavy Equipment and Truck Repairs Shop and Field in the Minning and Construction Industry

J.R.

J.R.

Technician

148 satisfied customers

13 years as warranty technician for Detroit Diesel

Cat Man

Cat Man

Caterpillar Engine Expert

3,768 satisfied customers

23 Years Caterpillar Engine experience.

Wayne

Wayne

Journeyman

3,131 satisfied customers

34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.

DR.Cummins

DR.Cummins

FIELD SERVICE TECHNICIAN

2,377 satisfied customers

16 Years working on Cummins Diesel engines,

Don

Don

Mechanic

553 satisfied customers

35 years experience journeyman mechanic transport truck and trailer including off road equipment

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x