Heavy Equipment

Heavy equipment repair questions? Ask an Expert now.

Connect one-on-one with {0} who will answer your question

Related Heavy Equipment Questions
I have a JD 3520 tractor. It fails to start and I am getting
I have a JD 3520 tractor. It fails to start and I am getting an error code 57 which references the HST timeout. What is the HST timeout mean and can the be preventing the tractor from starting?… read more
Rudolph Diesel
Rudolph Diesel
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
3406 cat engine, just changed the injector pump..cylinders
I have a 3406 cat engine, just changed the injector pump now the engine is getting how when we put a load on it, I checked the cylinders the end ones are at 650 deg and the middles are at 850 should i… read more
Cat Man
Cat Man
Caterpillar Engine Expert
Vocational, Technical or Trade Scho
3,768 satisfied customers
I just completed a rebuild on a cummins m11..knock..high rpm
Hello There, I just completed a rebuild on a cummins m11. It has a knock at high rpm and under a load. Does not do this at an idle. I preformed the cutout tests with insite and all cylinders passed. T… read more
DR.Cummins
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
2,377 satisfied customers
I bought a 2005 M2. The HVAC. doesnt seem to work right.
I bought a 2005 M2. The HVAC. doesn't seem to work right. I checked to see if it had power and it dose.I also got the blower motor to run a couple of times. I know it has an override type system. Any … read more
Clayton
Clayton
Technician
Vocational, Technical or Trade Scho
627 satisfied customers
I purchased an 850 John Deere 3 cylinder diesel tractor with
I purchased an 850 John Deere 3 cylinder diesel tractor with a yanmar engine with less than 1100 hours. The tractor cranks excellent and runs excellent with good oil pressure but it has a blue smoke t… read more
Curtis B.
Curtis B.
Retired service manager
Associate Degree
3,486 satisfied customers
about are soft block, bad valves, Injector cups, and cooling problems
I have a pair of 3116 Cats, 350 hp in my boat and I would like to know if they are in the serial number range that had the problems. The problems I have heard about are soft block, bad valves, Injecto… read more
Cat Man
Cat Man
Caterpillar Engine Expert
Vocational, Technical or Trade Scho
3,768 satisfied customers
1999 GMC: heater blower..the blower fan or maybe a relay or something
1999 GMC C6500 Turn the heater blower on, it runs for a bit and then stops. Wondering if it would be the blower fan or maybe a relay or something like that… read more
Gary
Gary
Shop Foreman
Vocational, Technical or Trade Scho
292 satisfied customers
MARINE: WATER TEMP..DEGREES..AT IDLE GOES DOWN TO 175..PROBLEM.
I HAVE A3116 CAT MARINE ENGINE THE WATER TEMP IS RISING AT RUNNING SPEED BUT NOT OVER HEATING JUST ABOUT 190 DEGREES IT WAS RUNNING AT THE RECOMENDED 180 WHEN AT IDLE GOES DOWN TO 175. I HAVE DONE ALL… read more
Cat Man
Cat Man
Caterpillar Engine Expert
Vocational, Technical or Trade Scho
3,768 satisfied customers
no cab blower../c clutch checked fuses on passenger side compartment
I have a 2006 Centuryclass s/t freightliner , no cab blower and no a/c , freeon level is good no power to a/c clutch checked fuses on passenger side compartment , found all to be good it hasd a 60seri… read more
Clayton
Clayton
Technician
Vocational, Technical or Trade Scho
627 satisfied customers
timing..15 miles and it came off again but was on hard acceleration
3406c peec today the clip that holds the spool for the timing advance came off and it came outthru the case, replaced the spool and clip and ran it about 15 miles and it came off again but was on hard… read more
Cat Man
Cat Man
Caterpillar Engine Expert
Vocational, Technical or Trade Scho
3,768 satisfied customers
electronics to replace an egr isx cummins s/n 14046387..kenworth
what do I have to do to the electronics to replace an egr ISX cummins s/n 14046387 with a non egr model s/n 14038472 it is in a 2003 Kenworth truck… read more
DR.Cummins
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
2,377 satisfied customers
my fan switch (blower motor..gone bad..my ac..jumper so I can have ac
I have a '97 Mack CH613....Question concerning my fan switch (blower motor) seems to have gone bad, would this also make my AC not work, I was still able to get AC with the fan on high but not on medi… read more
Clayton
Clayton
Technician
Vocational, Technical or Trade Scho
627 satisfied customers
service done on my 2005 freightliner..let me know why my radio..12v
So I go get some service done on my 2005 Freightliner M2. I ask them to let me know why my radio and 12V accessory receptacle doesn't work. They remove my factory radio, somehow snap off the front pan… read more
Buddy
Buddy
Diesel Technician
High School or GED
703 satisfied customers
I drive an 2005 Freightliner M2 Business Class with a persistant
I drive an 2005 Freightliner M2 Business Class with a persistant problem. One is the blower motor for the heating and air conditioner will not operate. The problem is not in the fuse. At first a littl… read more
Buddy
Buddy
Diesel Technician
High School or GED
703 satisfied customers
coolant..water pump and radiator are good and clear..cooling system
i have an 850 c case dozer that continues to push coolant out the overflow but only at high idle at low idle all is normal thermastat is good and water pump and radiator are good and clear as well coo… read more
Heath
Heath
Service Tech
Diesel technology
62 satisfied customers
Freightliner..Detroit..A few weeks ago the bunk a/c quit working
I own a 2003 freightliner columbia. Detroit engine. A few weeks ago the bunk a/c quit working. I replaced the blower motor and that did not help. I checked all the fuses and none of them seem to be bl… read more
Buddy
Buddy
Diesel Technician
High School or GED
703 satisfied customers
doesnt work..speeds, what do they use for a blower motor controller
I have a TS115a and the blower doesn't work on all speeds, what do they use for a blower motor controller… read more
Dan
Dan
truck and trailer mechanic
Vocational, Technical or Trade Scho
50 satisfied customers
Jumping..850 to 1500 degrees and back..gauge..wire harness
I have a Acert motor in a Peterbilt that has a problem with the pyrometer jumping from 850 to 1500 degrees and back on a regular basis. We had the truck in to Johnson Cat in Riverside which they put t… read more
Tim
Tim
Foreman
Associate Degree
338 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Chris (aka - Moose)

Chris (aka - Moose)

Technician

113 satisfied customers

16 years of experience

Tim

Tim

Foreman

338 satisfied customers

23 Years Heavy Equipment and Truck Repairs Shop and Field in the Minning and Construction Industry

J.R.

J.R.

Technician

148 satisfied customers

13 years as warranty technician for Detroit Diesel

Cat Man

Cat Man

Caterpillar Engine Expert

3,768 satisfied customers

23 Years Caterpillar Engine experience.

Wayne

Wayne

Journeyman

3,131 satisfied customers

34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.

DR.Cummins

DR.Cummins

FIELD SERVICE TECHNICIAN

2,377 satisfied customers

16 Years working on Cummins Diesel engines,

Don

Don

Mechanic

553 satisfied customers

35 years experience journeyman mechanic transport truck and trailer including off road equipment

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x