How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sevn103 Your Own Question
sevn103
sevn103, Journeyman
Category: Heavy Equipment
Satisfied Customers: 275
Experience:  Cummins,International certified diesel mechanic
20119161
Type Your Heavy Equipment Question Here...
sevn103 is online now
A new question is answered every 9 seconds

I work on international prostar 2010in a/c system,the problem

Resolved Question:

I work on international prostar 2010in a/c system,the problem is the clutch of a/c compressor dont work, i ck.hi pressure switch,compressor cluth i ck.pressure. In the system is ok.i replaced high pressure switch.and a/c dont work the a/compressor cluth dont have power.
Submitted: 5 years ago.
Category: Heavy Equipment
Expert:  sevn103 replied 5 years ago.
You will need to most likely replace the thermistors, they are very common to go bad, to verify you would need to connect a laptop to check the readings they are giving off, but if 1 is reading wrong it will shut the system down. Also you will need to evac and charge system to do repair
sevn103 and other Heavy Equipment Specialists are ready to help you