How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin K Your Own Question
Kevin K
Kevin K, Technician
Category: Heavy Equipment
Satisfied Customers: 81
Experience:  30 year, 15 years Service manager, Factory Training on Case IH, John Deere, International Harvester
Type Your Heavy Equipment Question Here...
Kevin K is online now
A new question is answered every 9 seconds

I have a john deere 566 baler - how do I string the twine?

Resolved Question:

I have a john deere 566 baler - how do I string the twine?
Submitted: 6 years ago.
Category: Heavy Equipment
Expert:  Kevin K replied 6 years ago.

Kevin K :

there are several steps to go throught so this is the best way for you to go and I will also give you alot more info , follow this link

Kevin K :

it will take you to the online operators manual for the 466/566 baler on the john deere web site, scroll down the left side to section 20 start at loading the left hand twine box and go down from there .. this will allow you to check any other adjustments as you go Good Luck Kevin K

Kevin K and other Heavy Equipment Specialists are ready to help you