Heavy Equipment

Heavy equipment repair questions? Ask an Expert now.

Ask an Expert,
Get an Answer ASAP!

Related Heavy Equipment Questions
A 379 heavy spec dirt truck that has a rebuilt n14..000 miles..pulling
i have a 379 heavy spec dirt truck that has a rebuilt n14 in it. about 20,000 miles ago i was pulling an end dump up a steep dirt road to rock pit. water started blowing out the overflow. engine fan w… read more
wheelhrs
wheelhrs
Vocational, Technical or Trade Scho
424 satisfied customers
engine cranks but sounds like no compression..intake..adjustment
Attempted to crank engine, engine cranks but sounds like no compression. Removed valve covers to inspect valves. Found #1 intake and exhaust valve lash way out of adjustment. Found one exhaust valve i… read more
William
William
Service Manager
Vocational, Technical or Trade Scho
40 satisfied customers
Losing coolant..rocker..sludge..have had cylinder head pressure
i have a cat c12 that is losing coolant, no visible signs of any water leaks, no water in oil and no water pressure in system. removal of rocker covers revealed lots of water and sludge. have had cyli… read more
Cat Man
Cat Man
Caterpillar Engine Expert
Vocational, Technical or Trade Scho
3,761 satisfied customers
it started losing power under load..seemed to spring an oil leak..mins
Hi i was using my tbo16 yesterday when it started losing power under load,it then seemed to spring an oil leak towards top left of engine as you look in the back panel . Not clear where it is coming f… read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
3,101 satisfied customers
coolant..exhaust puffing into radiator, and now about 1 qt..injector
8V-71; I've got loss of coolant (added about 10 gallons over a couple months), what appears to be exhaust puffing into radiator, and now about 1 qt. of water in bottom of oil pan (oil still looks good… read more
Curtis B.
Curtis B.
service manager
Associate Degree
2,283 satisfied customers
I have a Massey 135 with the Perkins 3-cylinder gas engine.
I have a Massey 135 with the Perkins 3-cylinder gas engine. I have good oil pressure but am not getting oil to the valve train. I,m trying to learn the oil flow routing so I can trouble shoot the prob… read more
Curtis B.
Curtis B.
service manager
Associate Degree
2,283 satisfied customers
I have a Massey Furguson GC2310 with a Iseki 3 cylinder diesel
I have a Massey Furguson GC2310 with a Iseki 3 cylinder diesel engine. This winter it started to run rough. I checked the fuel and it looked ok but drained the tank and changed the fuel filter. Checke… read more
Curtis B.
Curtis B.
service manager
Associate Degree
2,283 satisfied customers
5 page written report on detroit Series 60 Diesel Lubrication System
Suppose to do a 5 page written report on Detroit Series 60 Diesel Lubrication System. Can't find info, only parts stores, and brochures, etc.… read more
FIX-IT
FIX-IT
Comercial transport technician
Vocational, Technical or Trade Scho
784 satisfied customers
Allis..that runs good but leaks water into the oil..seal..miss fire
I have an HD 9 Allis Chalmers crawler endloader that has a 4-71 Detroit diesel that runs good but leaks water into the oil if you shut it off. Can you tell me if there is a water seal or area that I c… read more
Curtis B.
Curtis B.
service manager
Associate Degree
2,283 satisfied customers
chipper with a cummins B series motor...Head gasket is fine.
I have a chipper with a Cummins B series motor. There is water in the oil. Head gasket is fine. Oil cooler is good. Can you tell me how the water might be getting in the oil?… read more
JCTech
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
377 satisfied customers
cam..cummins..new injectors, rebuilt pt pump, all new fuel lines
I just did a complete rebuild on a 1987 855 nt big cam 4 cummins. I had the heads redone, new injectors, rebuilt pt pump, all new fuel lines all the way back to the tanks and new return lines. I keep … read more
Air Brakes and other fun stuff
Air Brakes and other fun stuff
Mechanic
Vocational, Technical or Trade Scho
36 satisfied customers
2001 Dodge: a 24 valve cummins that..block..intake..gasket
I have a 2001 Dodge with a 24 valve cummins that is leaking oil out of the side of the block. It's leaking under the intake along a seam that looks like there is a gasket there. Is there a gasket ther… read more
William
William
Service Manager
Vocational, Technical or Trade Scho
40 satisfied customers
ISUZU: TIMING MARKS PLEASE ,ON A DIAGRAM IF POSSIBLE..DIESEL ENGINE
TIMING MARKS PLEASE ,ON A DIAGRAM IF POSSIBLE FOR A ISUZU 1.4 DIESEL ENGINE OUT OF A MINI DIGGER .THANKS… read more
Diesel Pro
Diesel Pro
diesel tech
Vocational, Technical or Trade Scho
38 satisfied customers
Ford: v8..a utility vehicle with fore wheel drive automatic..cab
i have a 1977 simons RO derrik digger with a ford v8 gas. brass tag on front right just below the head on the block #s stamped is rc-26 77046.this is a utility vehicle with fore wheel drive automatic.… read more
JBFixer
JBFixer
Mechanic
Vocational, Technical or Trade Scho
30 satisfied customers
White smoke..caterpillar..I did a pressure test on the radiator
C-15 question. Had a white smoke problem with my c-15 caterpillar. I did a pressure test on the radiator, and pressure climbed to 30 psi before I quite the test. Also did a bubble test on the radiator… read more
Tim
Tim
Foreman
Associate Degree
338 satisfied customers
Cylinder..The radiator coolant level goes..engine starts..valve cover
The machine is a JD 6000 sprayer with 4 cylinder diesel engine. The radiator coolant level goes down and engine starts to overheat after about 2 hours of running. Steam is coming from a vent tube at t… read more
JBFixer
JBFixer
Mechanic
Vocational, Technical or Trade Scho
30 satisfied customers
hello, I need to adjust valves for a C18 cat diesel engine
hello, I need to adjust valves for a C18 cat diesel engine ... I also would like to know the tools required for the C18 cat engines valve adjustment Also,..I need some instuctions to walk me through t… read more
Tim
Tim
Foreman
Associate Degree
338 satisfied customers
GMC: I need to knnow the torque of cylinder head..V8..shaft
I need to knnow the torque of cylinder head for a GMC Sierra 1986 V8 Diesel 7000 caterpillar 3208, serial num.#32y1up, and too the torque of rocker arm shaft bracket and calibration of exhaust valve a… read more
Tim
Tim
Foreman
Associate Degree
338 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Chris (aka - Moose)

Chris (aka - Moose)

Technician

112 satisfied customers

16 years of experience

Tim

Tim

Foreman

338 satisfied customers

23 Years Heavy Equipment and Truck Repairs Shop and Field in the Minning and Construction Industry

J.R.

J.R.

Technician

148 satisfied customers

13 years as warranty technician for Detroit Diesel

Cat Man

Cat Man

Caterpillar Engine Expert

3,761 satisfied customers

23 Years Caterpillar Engine experience.

Wayne

Wayne

Journeyman

3,101 satisfied customers

34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.

DR.Cummins

DR.Cummins

FIELD SERVICE TECHNICIAN

2,371 satisfied customers

16 Years working on Cummins Diesel engines,

Curtis B.

Curtis B.

service manager

2,283 satisfied customers

30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x