Heavy Equipment
Heavy equipment repair questions? Ask an Expert now.
Connect one-on-one with {0} who will answer your question
Answered in 26 minutes by:
6/13/2010
DR.Cummins, FIELD SERVICE TECHNICIAN
Category: Heavy Equipment
Satisfied Customers: 4,506
Experience: 16 Years working on Cummins Diesel engines,
Verifiedhello the spec for the pump is 6 INHG Min and 10INHG max for restriction-Minimum Cranking Fuel Pressure 25 psi [email protected] 120 psi --- governed speed 150-180 psi. Hope this helped
DR.Cummins, FIELD SERVICE TECHNICIAN
Category: Heavy Equipment
Satisfied Customers: 4,506
Experience: 16 Years working on Cummins Diesel engines,
VerifiedDR.Cummins and 87 other Heavy Equipment Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a technicianLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Heavy Equipment Questions
hello, iwas wondering if anyone would know. an L10 with stc
hello, iwas wondering if anyone would know. an L10 with stc injectors. is there a viscosity senor for the oil control valve. or possibly know the manual part number.… read more
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
4,506 satisfied customers
l10 cummins 94 model in a tipper..jump start..started fine..its parked
have a l10 cummins 94 model in a tipper with celect lights problem is had to jump start truck other day unsure why as batteries are new when it started check engine light stayed on was idling along to… read more
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
352 satisfied customers
07 International 9400 with an isx cummins...truck ran out of fuel.
I have an 07 International 9400 with an ISX cummins. The truck ran out of fuel. I added fuel, prime system best as can, and now it is a no start, tries to start but will not run. I even emptied a whol… read more
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
4,506 satisfied customers
Last week the truck started acting as if it was losing fuel under load
I have a 1993 International 8100 tractor with an STC L10. The CPL is 1558. Last week the truck started acting as if it was losing fuel under load and was cutting out. Mechanic assumed PT pump. We got … read more
Daniel Wilson
Associate Degree
1,315 satisfied customers
cummins..rebuild..idles rough..return line (to fuel tank) if clamp
Have cummins L10 in 1993 case 921 loader #34688909 model LTA10C S/E06149 Ref#104048A1A put rebuild fuel pump on still same thing idles rough,no throttle seems like too much fuel comming out return lin… read more
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
352 satisfied customers
fuel pump on my cummins vt 225..mechanical..high flow electric pump
Is the fuel pump on my Cummins vt 225, ser# XXXXX mfg date: 12/79, fuel rate 69.0 electric or mechanical? Can I change it out for a high flow electric pump?… read more
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
352 satisfied customers
Cummins L10 in 1993 case loader idles but nothing..peddle..lever
cummins L10 in 1993 case loader idles but nothing happens when push fuel peddle down or move lever on pump #34688909 model LTA 10 C S/E 06149 Ref # XXXXX… read more
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
4,506 satisfied customers
cummins l10 in a 1986 t600 kenworth..rpm..back down..accelerator pedal
I have a cummins L10 in a 1986 T600 Kenworth and when I take off and change gears the engine rpm's will not fall or idle down between gears as quick as it should. I have to give it time to idle back d… read more
tj
Bachelor's Degree
457 satisfied customers
Coach..injectors being correct for this engine (3279505px fitted)..PT
Have a 1987 Leyland Plaxton Tiger Coach with Cummins L10 Engine, unable to fire up after servicing and refitting new head. Unsure of where to find model and serial numbers. Unsure of injectors being c… read more
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
4,506 satisfied customers
Cummins..injectors..corret injector travel and timing adjustment and i
I repair Cummins L10 and when i start the. Egine compres is in the fuel reture from the cyllinderhead. I fit new injectors and do corret injector travel and timing adjustment and i put a new head and … read more
DR.Cummins
FIELD SERVICE TECHNICIAN
High School or GED
4,506 satisfied customers
1993 ford: L..crank..It was diagnosed by the local cummins dealer..ecm
I recently purchased a 1993 ford L 9000 with an L 10. It would crank but not start at the time of purchase. It was diagnosed by the local cummins dealer in Tulsa as having a bad ecm. I sent the ecm of… read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
3,308 satisfied customers
Hi Buddy, I am considering installing a L10 Cummins out of
Hi Buddy, I am considering installing a L10 Cummins out of a 92 White truck in my pulling tractor. I am wondering how much horsepower I can get out of it, and still keep it reliable? Also don't know h… read more
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
352 satisfied customers
A cummins PT fuel pump from L-10 (210 horse power)..Mechanical
Hello, I would like to know if it is possible to adapt a cummins PT fuel pump from L-10 (210 horse power) to an L10 (310 horse power) . The CPL for my engine is 1558. I am having hard time to find cum… read more
tj
Bachelor's Degree
457 satisfied customers
We have just purchased an 1994 International 8100 series L10 Cummins
Hi, We have just purchased an 1994 International 8100 series L10 Cummins and the insurance company is asking the engine size, I assume the cc can you advise. Regards, Alan.… read more
Buddy
Diesel Technician
High School or GED
703 satisfied customers
1998 gleaner r72 combine that has a cummins m11..mods..horsepower
I'm an independent ag repair business. I have a customer with a 1998 Gleaner R72 combine that has a Cummins M11 engine. Have done mods on combine that allows the machine to run faster through the fiel… read more
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
352 satisfied customers
1994 Volvo: tractor..(Cummins N10) was pulling cargo..engin
Our 1994 Volvo white HWY tractor with (Cummins N10) was pulling cargo on the road in Africa. When the driver tried to downshift, the engin quit running. He tried to restart the truck, but the starter … read more
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
352 satisfied customers
92 volvo: cummins..cannot start..driving down..the highway sometimes
I have a 92 volvo with an L10 cummins. We cannot start the truck unless the stop engine light turns off, but sometimes it takes half an hour to turn off. The engine also shuts down driving down the hi… read more
Buddy
Diesel Technician
High School or GED
703 satisfied customers
I OWN A 1994 CUMMINS L10 ENGINE THAT IS GOVERNED TO TURN 1700
I OWN A 1994 CUMMINS L10 ENGINE THAT IS GOVERNED TO TURN 1700 RPM MAX. HOW DO I GET THE ENGINE TO TURN 2100 RPM?… read more
Chris Huber
President
Vocational, Technical or Trade Scho
47 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.
Elm City, NC
used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.
Richmond, TX
9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.
Marysville, CA
Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.
Walnut Creek, CA
As a single woman, I really appreciate an excellent and affordable opinion.
Charleston, WV
Thank you Geordie, I will not hesitate to contact justanswer in the future!
Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.
Castleberry, FL
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
< Previous | Next >
Meet the Experts:
Chris (aka - Moose)
Technician
133 satisfied customers
24 years of experience diagnosing & repairing
Tim
Foreman
338 satisfied customers
23 Years Heavy Equipment and Truck Repairs Shop and Field in the Minning and Construction Industry
Cat Man
Caterpillar Engine Expert
3,777 satisfied customers
23 Years Caterpillar Engine experience.
Wayne
Journeyman
3,308 satisfied customers
34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.
Curtis B.
service manager
2,404 satisfied customers
30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts
DR.Cummins
FIELD SERVICE TECHNICIAN
4,506 satisfied customers
16 Years working on Cummins Diesel engines,
Don
Mechanic
553 satisfied customers
35 years experience journeyman mechanic transport truck and trailer including off road equipment
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
