How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Buddy Your Own Question
Buddy, Technician
Category: Heavy Equipment
Satisfied Customers: 730
Experience:  25 years experience
Type Your Heavy Equipment Question Here...
Buddy is online now
A new question is answered every 9 seconds

Century: Active Fault 1 and the ABS light is on

Customer Question

My Freightliner century shows an Active Fault 1 and the ABS light is on. What do I need to do to fix it?
Submitted: 7 years ago.
Category: Heavy Equipment
Expert:  Buddy replied 7 years ago.

Hi and welcome to JA. I am Buddy, and i will try and help you out.


On your dash display, when it says active fault. Try pressing and holding the mode/reset button in for couple seconds, and then just push it in and out to cycle thru the rest of the code. It should start with a mid136 and then be 2 more sets of numbers. Let me know what they are so we can narrow the fault code down and also what is the last 6 of your truck vin#.


Edited by Buddy on 3/30/2010 at 3:32 AM EST
Customer: replied 7 years ago.

I am not in the truck right now but I will try it tomorrow morning and get back with you.


Thank you-

Expert:  Buddy replied 7 years ago.

Just reply back to this post. I am on and off all day long .I will be looking for your reply.