How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., service manager
Category: Heavy Equipment
Satisfied Customers: 28636
Experience:  30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts
Type Your Heavy Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Tractor..a T6 D5nn6015F stamped onthe block..hood..cylinder..reverse

Resolved Question:

I have a tractor with a T6 D5nn6015F stamped onthe block and the model #CA223C on the hood. I can't find any info on it, is the another model # XXXXX something it goes by? It is a 3 cylinder 6 speed with reverse. Geoff
Submitted: 7 years ago.
Category: Heavy Equipment
Expert:  Curtis B. replied 7 years ago.
Look at the ford 3000 model. I think this is what you have. Fords little plate under the hood usually gives the ca number and the base model.
Customer: replied 7 years ago.
can you nail the year down?
Expert:  Curtis B. replied 7 years ago.
Did you find the plate under the hood? It has the serial number on it also.With the serial number we can find year of manufacture, 3000s were produced from 1965 to 1975. And you did say six speed? I assume this is a manual trans and not the old selectronic.
Customer: replied 7 years ago.
yes, it's a manual 3 speed with a hi and lo range, no serial no. but the no. on the block is D5nn6015F and the tractor no. is(NNN) NNN-NNNN_ the last no. may be missing
Expert:  Curtis B. replied 7 years ago.
You have a 1979 model 3600 . This is the newer version of the 3000. Thanks.
Curtis B. and other Heavy Equipment Specialists are ready to help you
Customer: replied 7 years ago.