Heavy Equipment
Heavy equipment repair questions? Ask an Expert now.
Connect one-on-one with {0} who will answer your question
Answered in 1 day by:
3/15/2009
Dan, Mechanic
Category: Heavy Equipment
Satisfied Customers: 73
Experience: 3yrs as a TnT mechanic, 10 yrs as a O/O long haul driver, 1 yr in technical school
Verifiedhi there from what i remember the oil capacity for the engine you have is around 20quarts, but if you can tell me which engine you have i can get more accurate info for you. As for the transmission, when you serviced it what oil did you put back in it. Usually when we do these machines we put hy-trans in them. It can be purchased at a case IH dealer or at Carquest if you have one in your area. Let me know if your engine has the injection pump the lower left side of the block looking at the engine from the front. Also does your engine have glow plugs? Tks Dan
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a technicianLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Heavy Equipment Questions
I have a John Deere 410J it has no power at all going
I have a John Deere 410J it has no power at all going forward. The temperature converter alarm goes on when in forward gear indicating to stop. The water in fuel alarm just went on too. … read more
RyanY78
208 satisfied customers
crawler overheating-hydraulic oil over heating- causes/fix
crawler overheating-hydraulic oil over heating- causes/fixes/ It is a 1999. Need answer now as am on a job.… read more
Steve
Self Employed
High School or GED
30 satisfied customers
Hello I have a cat 950 73j serial, bought the machine a while
Hello I have a cat 950 73j serial, bought the machine a while ago and I´ve been told it had been sitting for a long time, now my question is, when cold, the transmission engages forward and reverse bu… read more
Daniel Wilson
Associate Degree
1,344 satisfied customers
Question on JD 450B Crawler Loader. During last summers use
Question on JD 450B Crawler Loader. During last summers use this problem started occuring. When the front of the crawler drops to about 30 degrees or the front of the crawler rises to about 45 degrees… read more
JBfixer
Mechanic
Vocational, Technical or Trade Scho
210 satisfied customers
M300: loader..gets warm..the machine is very slow to engage reverse
I own a mf300 crawler loader and once the transmission oil gets warm the machine is very slow to engage reverse, the hotter the oil gets the slower it responds. do you have any answer as to why this h… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
1977 john deere 450c dozer will not move forward after about
1977 john deere 450c dozer will not move forward after about 15 minutes of use but will go in reverse… read more
DeereVet
Heavy Equipment Technician
5 satisfied customers
is cold the transmission is very sluggish...red zone
My 977L has a couple of issues. When it is cold the transmission is very sluggish. Then when I run it hard for 2 to 3 hours the transmission temp gets into the red zone. I added SAE30 oil to the trans… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
Hello, i own a JD 3520 compact tractor with the power reverser.
Hello, i own a JD 3520 compact tractor with the power reverser. The machine has been at the dealer for 78 of it's 150 hour life so far. The problems are all hydraulic in nature. So far the tractor has… read more
tj
Bachelor's Degree
457 satisfied customers
Lift..that shifts very slowly from forward to reverse..pedal
I have a hyster lift truck that shifts very slowly from forward to reverse. Reverse is tough to obtain. The monotrol shift pedal was internally leaking fluid. Tranny fluid would come out of reverse an… read more
Jeff
High School or GED
325 satisfied customers
Jd..It fires right up everything works fine.The problem..cluch..rpms
I have a jd 450c crawler i bought a while back. It fires right up everything works fine.The problem is when running in netural its under a 1000rpm load you can push in the cluch and it sounds normal,t… read more
ebnel
Current Certified Master technician
High School or GED
251 satisfied customers
It drives fine in forward gears but is very slow..backing..parked
We have a Cat 416 extendahoe It drives fine in forward gears but is very slow in reverse any grade while backing up and it will stop.It was fine when I parked it 2 months ago now we have a reverse pro… read more
C.J.
Heavy Equipment Mech
High School or GED
11 satisfied customers
i have a cat v80d forklift. the tranny fluid shoots out of
i have a cat v80d forklift. the tranny fluid shoots out of the spout and will not move. what is the problem?… read more
Jeff
High School or GED
325 satisfied customers
Loader..backhoe..my reverse is intermitant and there is no high gear
i have recently aquired a mid 70's JD450B crawler/loader w/ backhoe attachment. at least thats what i was told it was. my question/complaint is, my reverse is intermitant and there is no high gear in … read more
John
tech
Vocational, Technical or Trade Scho
112 satisfied customers
I have a Deere 310 backhoe with shuttle shift on the column.
I have a John Deere 310 backhoe with shuttle shift on the column. The drive response is very weak, tractor will move OK in low range gears but will not in high range gears. Very sluggish. We are chang… read more
JBfixer
Mechanic
Vocational, Technical or Trade Scho
210 satisfied customers
You can here the clutch engage and dis engage but it..rebuilt..gears
i have a 1975 450 c crawler you push in the clutch and place into gear and release clutch and nothing happens it will not move forward or reverse you can here the clutch engage and dis engage but it w… read more
JBfixer
Mechanic
Vocational, Technical or Trade Scho
210 satisfied customers
Deer 350 be bulldozer loses power when going forward and
john deer 350 be bulldozer loses power when going forward and seems to stick goes backwards fine… read more
JBfixer
Mechanic
Vocational, Technical or Trade Scho
210 satisfied customers
Unit need to be rebuilt, shifts slowly into reverse..warms
1975 jd350C track loader, power shift starts not going into reverse after machine worms up, is there a way to adjust or unit need to be rebuilt, shifts slowly into reverse or just wont go into revers … read more
John
tech
Vocational, Technical or Trade Scho
112 satisfied customers
I have a international 500c dozer with a forward reverser and
I have a international 500c dozer with a forward reverser and I can't get it to move. It is trying very slowly back and forth. It did this to me in the fall and I thought maybe ice. I did get it movin… read more
John
tech
Vocational, Technical or Trade Scho
112 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.
Elm City, NC
used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.
Richmond, TX
9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.
Marysville, CA
Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.
Walnut Creek, CA
As a single woman, I really appreciate an excellent and affordable opinion.
Charleston, WV
Thank you Geordie, I will not hesitate to contact justanswer in the future!
Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.
Castleberry, FL
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
< Previous | Next >
Meet the Experts:
Chris (aka - Moose)
Technician
133 satisfied customers
24 years of experience diagnosing & repairing
Tim
Foreman
338 satisfied customers
23 Years Heavy Equipment and Truck Repairs Shop and Field in the Minning and Construction Industry
Cat Man
Caterpillar Engine Expert
3,777 satisfied customers
23 Years Caterpillar Engine experience.
Wayne
Journeyman
3,308 satisfied customers
34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.
Curtis B.
service manager
2,404 satisfied customers
30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts
DR.Cummins
FIELD SERVICE TECHNICIAN
2,392 satisfied customers
16 Years working on Cummins Diesel engines,
Don
Mechanic
553 satisfied customers
35 years experience journeyman mechanic transport truck and trailer including off road equipment
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
