How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask CaseFace Your Own Question
CaseFace, Mechanic
Category: Heavy Equipment
Satisfied Customers: 303
Experience:  22yrs Auto,Truck,Tractor Trailer,Heavy Equipment, Industrial Truck,Forklift,Motor Coach,Tour Bus
Type Your Heavy Equipment Question Here...
CaseFace is online now
A new question is answered every 9 seconds

Special: starter..engines..the bolt located behind the solenoid and is

Resolved Question:

Hello, this isCustomeragain, My problem today is what is the simplest way to remove a mack truck starter on "MACK vision and CH model e-series engines,namely the bolt located behind the solenoid and is thier a special tool for this job ?
Submitted: 8 years ago.
Category: Heavy Equipment
Expert:  CaseFace replied 8 years ago.


I see that noone has answered so I will try to help.


I'm not sure about the mack but when I'm in this

situation I will get a closed end wrench on the bolt crack it loose

with a heavy hammer or a pipe.


Then as you did with the 1/2 extension, use a 3/8 ext with

a thin short socket.




Please press the Accept Button if you are satisfied with the answer.

CaseFace and other Heavy Equipment Specialists are ready to help you