Heavy Equipment
Heavy equipment repair questions? Ask an Expert now.
Connect one-on-one with {0} who will answer your question
Answered in 1 hour by:
8/19/2008
Rudolph Diesel, ASE ,Master Heavy Truck Technichian
Category: Heavy Equipment
Satisfied Customers: 1,943
Experience: 25 YEARS OF HEAVY EQUIPMENT REPAIRS
VerifiedHello
Welcome to JA!
Is there any repair history on the transmission
i see there is a fluid change
Thanks
Hart
Hello
The best i can do for that part is send you to a link for the service manual.
Due to copyright reasons i cant copy John Deere service manuals.
Im thinking you know that working for J-D, ?
http://www.ssbtractor.com/tractor_manual_display.cgi?m=John%20Deere&o=5210,%205310,%205410,%205510
Let me know if i can help you more!
Hart
Rudolph Diesel, ASE ,Master Heavy Truck Technichian
Category: Heavy Equipment
Satisfied Customers: 1,943
Experience: 25 YEARS OF HEAVY EQUIPMENT REPAIRS
VerifiedRudolph Diesel and 87 other Heavy Equipment Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a technicianLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Heavy Equipment Questions
Curtis! from Hungary. I have a ford 655c loader. I have a
hello Curtis! I'm Oliver from Hungary. I have a ford 655c loader. I have a service book. Even though I read the book, there's a solenoid control valve 2 screw, there's no description of it. (RED rings… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
I am looking for some advice on a tractor repair. ford/new
i am looking for some advice on a tractor repair. ford/new hollland 2120 hydraulic clutch issue. can you help? … read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
4wd..shift lever..steering column..transmision stays in nuetral
john deere 300 4wd loader backhoe will not shift into forward or reverse. Moving the shift lever on the steering column will not ingauge forward or reverse, transmision stays in nuetral.… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
lift..two floor sticks and a shift lever on dash for f and r.
i have a lift all brand forklift built on a john deere 480 power unit. Is the tractor auto shft or manual? I have two floor sticks and a shift lever on dash for f and r. Do not know if I have fried an… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
LATE 80,s jcb BACKHOE THAT OPERATES FINE..SLIP..REVERSE..AGAIN.
I HAVE A LATE 80,S JCB BACKHOE THAT OPERATES FINE ON START UP BUT AFTER A SHORT TIME THE TRANSMISSION STARTS TO SLIP, USUALLY REVERSE FIRST THEN FORWARDS TILL IT WONT MOVE . EVEN HAPPENS NOT MOVING JU… read more
daves71
Service Manager
High School or GED
668 satisfied customers
John Deere..sitting..hydraulic oil..the reverser dipstick looked ok
Hi I am buying a John Deere 410d. It has been sitting for about a year or more. The hydraulic oil was very low in one tube, but the reverser dipstick looked ok. I filled it up, but cant get the machin… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
s transmission shifts, (forward, neutral, reverse)..throttle
Hi Curtis, Our Hyster forklift's transmission shifts, (forward, neutral, reverse) visually, but even in neutral or forward, it wants to start moving in reverse. It will go forward if you push the thro… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
Backhoe..reverse..it was in 3rd gear and went to let out the clutch
HI, I have a 1987 710B Backhoe that has a shuttle shift transmission. When I put it into reverse while it was in 3rd gear and went to let out the clutch there was a pop and I pressed the clutch back i… read more
tj
Bachelor's Degree
457 satisfied customers
Aloha! We have a Hyster H60F with a monotrol - automatic transmission.
Aloha! We have a Hyster H60F with a monotrol - automatic transmission. It does not engage in any forward or reverse, the brake pedal and handbrake switch is okay, We removed the top plate and cleaned … read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
Hi, We have a 2001 2.5 Ton hyster forklift...lever..engage
Hi, We have a 2001 2.5 Ton Hyster forklift. The forward/reverse lever does not engage the drive. The reversing beacon does not sound aswell. Engine working fine. Forklift just will not move forward or… read more
Curtis B.
service manager
Associate Degree
2,404 satisfied customers
Jd..It fires right up everything works fine.The problem..cluch..rpms
I have a jd 450c crawler i bought a while back. It fires right up everything works fine.The problem is when running in netural its under a 1000rpm load you can push in the cluch and it sounds normal,t… read more
ebnel
Current Certified Master technician
High School or GED
251 satisfied customers
A Case 1150B dozer that will not move forward..stopped moving..reverse
Case 1150B Dozer Question I have a Case 1150B dozer that will not move forward. When I was using it it began to act as if the brake was on and then stopped moving forward. It goes in reverse in all th… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have a Deere 310 backhoe with shuttle shift on the column.
I have a John Deere 310 backhoe with shuttle shift on the column. The drive response is very weak, tractor will move OK in low range gears but will not in high range gears. Very sluggish. We are chang… read more
JBfixer
Mechanic
Vocational, Technical or Trade Scho
210 satisfied customers
My brother has a 98 cummins 12 valve..cool..reverse..automatic trans
my brother has a 98 cummins 12 valve. while mudbogging the truck got hot and the trans started slipping. We let it cool but then discovered that nutrual and reverse no longer work, this is an automati… read more
Don
Mechanic
Vocational, Technical or Trade Scho
553 satisfied customers
I have a 2003 Cat 277B skid loader with 1410 hours..getting harder
I have a 2003 Cat 277B skid loader with 1410 hours. I put on about 120 of the hours. It seems to be getting harder to turn and go over obstacles. I use it to build/maintain a motocross track. Now I ca… read more
Tim
Foreman
Associate Degree
338 satisfied customers
Neutral..the clutch - the tractor loses its engine brakes
When driving down a steep hill in low gear, my Shibaura 80hp tractor will sometimes frighteningly speed up as if going into neutral (but it's not jumping out of gear). Usually a dab on the brakes slow… read more
John
tech
Vocational, Technical or Trade Scho
112 satisfied customers
The automatic transmision will not move the tractor..fluid level
MF 50 1971 Tractor has set for 6 months. The automatic transmision will not move the tractor using the F or the R foot pedles. fluid level is up. I idled and ran up the RPM's for over a 2 hour period … read more
Rudolph Diesel
ASE ,Master Heavy Truck Technichian
Vocational, Technical or Trade Scho
1,943 satisfied customers
temp 14 degrees..30 minute warmup and 1/2 mile..engage..service manual
Plowing snow, temp 14 degrees F. after a 30 minute warmup and 1/2 mile of plowing the transmission would no longer engage reverse. I continued to plowing about 2 hours in forward, still no reverse. I … read more
Bill
High School or GED
54 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.
Elm City, NC
used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.
Richmond, TX
9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.
Marysville, CA
Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.
Walnut Creek, CA
As a single woman, I really appreciate an excellent and affordable opinion.
Charleston, WV
Thank you Geordie, I will not hesitate to contact justanswer in the future!
Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.
Castleberry, FL
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
< Previous | Next >
Meet the Experts:
Chris (aka - Moose)
Technician
133 satisfied customers
24 years of experience diagnosing & repairing
Tim
Foreman
338 satisfied customers
23 Years Heavy Equipment and Truck Repairs Shop and Field in the Minning and Construction Industry
Cat Man
Caterpillar Engine Expert
3,777 satisfied customers
23 Years Caterpillar Engine experience.
Wayne
Journeyman
3,308 satisfied customers
34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.
Curtis B.
service manager
2,404 satisfied customers
30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts
DR.Cummins
FIELD SERVICE TECHNICIAN
2,392 satisfied customers
16 Years working on Cummins Diesel engines,
Don
Mechanic
553 satisfied customers
35 years experience journeyman mechanic transport truck and trailer including off road equipment
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
