GMC

GMC troubleshooting questions? Ask a mechanic for answers

Ask an Expert,
Get an Answer ASAP!

This answer was rated:

1990 GMC Suburban V1500, i'm trying to replace the ball

hi 1990 GMC Suburban V1500, i'm...
hi
1990 GMC Suburban V1500, i'm trying to replace the ball joints, and tie rods. I'm very confused with the parts i have to get. Searched online, found a lot of different types... Mine has leaf spring on front....
Can i get some help with part# ***** some pics. I need the ball joints and tie rod ends.
here is the vin# ***** needed 1gkev16kxlf521755
Thank you
Show More
Show Less
Ask Your Own GMC Question
Answered in 1 minute by:
3/16/2018
JFN1
JFN1, ASE Certified Technician
Category: GMC
Satisfied Customers: 5,694
Experience: GM Master Technician
Verified

I can help you with this. Let me research it and get you a parts list.

Ask Your Own GMC Question
Customer reply replied 4 months ago
thanks

Ball joints should be 8194T and 8195T, get two of each.

Inner tie rod ends are ES2026R and ES 2027L, one of each.

Outer tie rod ends are ES2233L and ES2234R, one of each.

Those are all Moog numbers, available in most parts stores, and easily cross referenced, if not. I highly recommend Moog suspension and steering parts.

Please take a moment to rate my answers by clicking on the stars at the top of the page, that's how I get compensated. If you need more help, just let me know, I am happy to follow up.

JFN1
JFN1, ASE Certified Technician
Category: GMC
Satisfied Customers: 5,694
Experience: GM Master Technician
Verified
JFN1 and 87 other GMC Specialists are ready to help you
Ask your own question now
Customer reply replied 4 months ago
i thank you much
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a gmc mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask JFN1 Your Own Question
JFN1
JFN1
JFN1, ASE Certified Technician
Category: GMC
Satisfied Customers: 5,694
5,694 Satisfied Customers
Experience: GM Master Technician

JFN1 is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Gm Tech (Cam)

Gm Tech (Cam)

GMC Mechanic

1,796 satisfied customers

GM Grand Master Technician 2007. 14 year experience.

Gary

Gary

ASE Certified Technician

1,588 satisfied customers

GCM master tech over 25 years

Dave Nova

Dave Nova

GMC Technician

929 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

GMC Technician

626 satisfied customers

16 years of experience

Ron Z.

Ron Z.

- GMC Tech -

279 satisfied customers

18+yrs experience. State Inspector & GMC Diagnostics/Repair

JFN1

JFN1

ASE Certified Technician

5,694 satisfied customers

GM Master Technician

George H.

George H.

ASE MasterTechnician

228 satisfied customers

15+ Years ASE Master Technician with Level 1 Certification

< Previous | Next >

Related GMC Questions
I have a 1990 GMC Suburban 4x4. I need to replace the ball
hello i have a 1990 GMC Suburban 4x4. I need to replace the ball joints, and tie rod ends. I found some on ebay, but i'm not sure if they will fit mine or not. i need a little help. thank you https://… read more
JFN1
JFN1
ASE Certified Technician
5,694 satisfied customers
Looking for front steering torque specs on a 98 GMC Sierra
Looking for front steering torque specs on a 98 GMC Sierra SLT. 350 … read more
tim37857
tim37857
Mechanic
High School or GED
71 satisfied customers
My 2009 gmc savana has 250.000 miles. it had a grinding
my 2009 gmc savana has 250.000 miles. it had a grinding sound or like squeak noise when drove over speed bumps or irregular roads. i replaced the lower ball joints located in the lower stabilizer bar … read more
Brandon
Brandon
93 satisfied customers
Way to much play in the wheel, excellent, 2003 gmc yukon
2003 gmc yukon denali new motor 3rd trans all new parts 325k miles … read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
1,588 satisfied customers
2005 Yukon XL with 140,000 miles. Vibration at 72-78 mph.
2005 Yukon XL with 140,000 miles. Vibration at 72-78 mph. Had tires rebalanced (but not road force balanced yet), new u-joints, drive shaft removed and straightened. Nothing fixes it. Have always used… read more
Peter Bagley
Peter Bagley
master technition
Vocational, Technical or Trade School
1,290 satisfied customers
1988 GMC Suburban V1500 4 x 4 solid front axle. I have a
1988 GMC Suburban V1500 4 x 4 solid front axle. I have a little play vertically in the passenger front wheel. replaced the u-Joint, packed bearings and torqued the spindle nit and lock not. Still have… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
97 satisfied customers
Gmc Terrain: Gmc terrain 2010, 52000 miles, steering wheel
Gmc terrain 2010, 52000 miles, steering wheel is having some hard spots causing unprecise and unpleasant driving.....doesn't return to the neutral (straight) position after turning a corner Thanks… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
1999 GMC Suburban wanders constantly. Replaced steering
1999 GMC Suburban wanders constantly. Replaced steering gear, steering position sensor, pitman arm, inner and outer tie rods, upper control arms.… read more
Chris (aka-Moose)
Chris (aka-Moose)
GMC Technician
Vocational, Technical or Trade School
626 satisfied customers
I have a 1999 GMC Yukon with 285000 miles, I have replaced
Hi, I have a 1999 GMC Yukon with 285000 miles, I have replaced the steering gear and pump, and the steering is loose, should I replace the tie-rods and ball joints?… read more
Chris (aka-Moose)
Chris (aka-Moose)
GMC Technician
Vocational, Technical or Trade School
626 satisfied customers
GMC Savana 2500 4x4: . I have a 1999 gmc savana 2500 4x4
Hi. I have a 1999 gmc savana 2500 4x4 quigley van which I have put appx. 20 k into restoration and goodies in the last 14 mos. since purchasing, as a 3rd owner.I now have a serious shaking problem wit… read more
Chris (aka-Moose)
Chris (aka-Moose)
GMC Technician
Vocational, Technical or Trade School
626 satisfied customers
Gmc Yukon XL 2500 SLT: I have a 2005 Yukon XL 2500. There's
I have a 2005 Yukon XL 2500. There's a something that sounds like an unbalanced tire coming from both sides of the front end. tires were just balanced and rotated again I know ball joints are going to… read more
Dave Nova
Dave Nova
GMC Technician
Associate Degree
929 satisfied customers
GM suburban: I have 1995 GMC K1500 Suburban = 175,000 miles.
I have 1995 GMC K1500 Suburban = 175,000 miles. New ball joints (upper and lower), new shocks, new idler arm, new pitman arm, new steering gear. 2 shops insist tie rod ends are good. has been aligned … read more
BOBBYSS
BOBBYSS
TECHNICIAN/ADVISOR
Associate Degree
8,343 satisfied customers
Can an improperly installed tie rod on a 2004 GMC Sierra Denali
Can an improperly installed tie rod on a 2004 GMC Sierra Denali Quadrasteer eventually cause problems with a viscous coupling or transfer case. Keep in mind the complexity of a QuadraSTEER. How many t… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,796 satisfied customers
GMC k2500 classic: 2000 K2500 gmc classic 4wd 5.7 gas ball
2000 K2500 gmc classic 4wd 5.7 gas ball joint on pitman arm is bad best way to change it what size are the nuts… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
2002 GMC Envoy. Occasional wobbly front wheels, very loose
2002 GMC Envoy. Occasional wobbly front wheels, very loose steering, high pitched ringing from wheel area, and can move wheel left to right and vice versa with car on jack. I know I need maintenance, … read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
1,588 satisfied customers
GM s15 fwd: I am changing the cv joint in my 1983 gmc s15 4wd
I am changing the cv joint in my 1983 gmc s15 4wd I have it apart to the axle removal, can not get it out does it have to be split… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
1,314 satisfied customers
GMC Jimmy 4x4 (Mid Size): I own a 1985 gmc jimmy 4x4 and i
I own a 1985 gmc jimmy 4x4 and i am having a steering/pulling issue. When i am driving sometimes (doesn't happen consistantly) the whole vehicle will drift (pull) to the left, with harder resistance i… read more
shawnrbaldwin
shawnrbaldwin
Owner/mechanic
5 satisfied customers
GMC Sierra 2500 HD SLT: I have some "play" in my steering wheel.
I have some "play" in my steering wheel. Not a lot of play but a little more than I like. How can I diagnose what the cause of the play is? 1997 GMC Sierra 2500 6.5l diesel EXT Cab Long Bed 2WD.… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x