GMC

GMC troubleshooting questions? Ask a mechanic for answers

Ask an Expert,
Get an Answer ASAP!

At a stop light is will say the oil pressure is low. Just…

Customer Question
At a stop light...

At a stop light is will say the oil pressure is low

Mechanic's Assistant: Have you checked the oil? How old is your oil pump?

Just had an oil change

Mechanic's Assistant: What is the model/year of your GMC?

2006 envey

Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far?

Just happend

Submitted: 7 months ago.Category: GMC
Show More
Show Less
Ask Your Own GMC Question
Answered in 5 minutes by:
1/19/2018
GMC Mechanic: Gary, ASE Certified Technician replied 7 months ago
Gary
Gary, ASE Certified Technician
Category: GMC
Satisfied Customers: 18,028
Experience: GCM master tech over 25 years
Verified

Welcome! My name is ***** ***** I will do my best to assist you with this problem.

Ask Your Own GMC Question
GMC Mechanic: Gary, ASE Certified Technician replied 7 months ago

can you be sure the engine oil is full on the dipstick ?

Ask Your Own GMC Question
Customer reply replied 7 months ago
it dose
GMC Mechanic: Gary, ASE Certified Technician replied 7 months ago

is the engine when its reading low making any abnormal noises at all ?

Ask Your Own GMC Question
Customer reply replied 7 months ago
not at all
GMC Mechanic: Gary, ASE Certified Technician replied 7 months ago

the odds are the oil they used is incorrect for this engine OR the oil pressure sensor is bad

i would have a shop test the oil pressure is its good replacing the oil pressure sensor usually corrects this issue

please dont forget to rate me here at Justanswer

you can always get me back for FREE for any follow up any time with this question even after you rate me here at Justanswer

if you have any questions please ask as i do not get credit for my work until you rate me here at Justanswer

Ask Your Own GMC Question
GMC Mechanic: Gary, ASE Certified Technician replied 6 months ago

how are you making out ?

please dont forget to rate me here at Justanswer

you can always get me back for FREE for any follow up any time with this question even after you rate me here at Justanswer

if you have any questions please ask as i do not get credit for my work until you rate me here at Justanswer

Ask Your Own GMC Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a gmc mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Gary Your Own Question
Gary
Gary
Gary, ASE Certified Technician
Category: GMC
Satisfied Customers: 18,028
18,028 Satisfied Customers
Experience: GCM master tech over 25 years

Gary is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Gm Tech (Cam)

Gm Tech (Cam)

GMC Mechanic

1,796 satisfied customers

GM Grand Master Technician 2007. 14 year experience.

Gary

Gary

ASE Certified Technician

18,028 satisfied customers

GCM master tech over 25 years

Dave Nova

Dave Nova

GMC Technician

929 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

GMC Technician

626 satisfied customers

16 years of experience

Ron Z.

Ron Z.

- GMC Tech -

279 satisfied customers

18+yrs experience. State Inspector & GMC Diagnostics/Repair

JFN1

JFN1

ASE Certified Technician

270 satisfied customers

GM Master Technician

George H.

George H.

ASE MasterTechnician

228 satisfied customers

15+ Years ASE Master Technician with Level 1 Certification

< Previous | Next >

Related GMC Questions
Ron. I have a 2008 GMC Yukon Denali with 150k miles that has
Hi, Ron. I have a 2008 GMC Yukon Denali with 150k miles that has been dealer maintained since purchase, had oil changes at least every 3k miles and all other suggested maintenance done. For the past t… read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
I have a 2009 Acadia that I'm having all kinds of problems
I have a 2009 Acadia that I'm having all kinds of problems with. Two months ago while I was driving on the highway it started cutting out on me and not wanting to shift. It had to be towed and the mec… read more
Eric
Eric
Auto Technician
589 satisfied customers
I have a 2007 Sierra with a 5.3 AFM engine. Lately the oil
I have a 2007 Sierra with a 5.3 AFM engine. Lately the oil pressure dropped to 20 at idle and 30psi at cruising speed. I just changed out the oil pressure switch and the small filter under it today an… read more
Matt
Matt
Engineer
Bachelor\u0027s Degree
5 satisfied customers
We just got done doing an engine rebuild due to oil pump
We just got done doing an engine rebuild due to oil pump failure. Now with refreshe engine i am still getting low oil alarm when stopped at a light after engine has been running for 30 min on the high… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
97 satisfied customers
2008 Yukon oil pressure light comes on, 166,000 miles.
2008 Yukon oil pressure light comes on, 166,000 miles. Replaced engine, used engine 33,000 miles with warranty for 36,000 or three years. The light tells me to stop engine immediately. The engine has … read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
GMC Sierra 2500 HD Classic SLE: Have a 2006 GMC Sierra with
Have a 2006 GMC Sierra with a 6.0 Liter vortec in it. 113,000 miles. My engine oil cooler lines were leaking. I took it in and had my lines replaced. Also had a oil change using Mobil 1 synthetic 5-30… read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
18,028 satisfied customers
I have a 2007 GMC Denali Yukon XL, while driving I got
Hi, I have a 2007 GMC Denali Yukon XL, while driving I got a warning saying low oil pressure and to turn off the engine. Stopped and popped the hood and removed the oil dip stick when i noticed smoke … read more
GM Bob
GM Bob
Automobile Technician
High School or GED
1,061 satisfied customers
GMC Denali Hybrid: Hey Ron,I have a question about
Hey Ron, I have a question for you about my 2011 Yukon Denali Hybrid. The other day while driving down the highway I experienced a slap/knock sound and they a slight jerk. It would only happen once ev… read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
18,028 satisfied customers
I have a 2006 GMC Envoy, straight 6 engine , that has 179000
I have a 2006 GMC Envoy, straight 6 engine , that has 179000 mile on it with no trouble until now. A little while ago I started hearing a little taping noise in the engine. I thought it sounded like a… read more
Gary
Gary
Senior Technician
Vocational, Technical or Trade School
102 satisfied customers
I have a 2007 GMC Yukon Denali with low oil pressure at an
I have a 2007 GMC Yukon Denali with low oil pressure at an idle. We just put in a new oil pump and pressure still drops to zero on idle. Truck runs perfect driving with Rpms up but when slowing down o… read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
18,028 satisfied customers
GMC Yukon XL 1500: I have a 2006 GMC Yukon XL, which has 200,000
I have a 2006 GMC Yukon XL, which has 200,000 miles. Approx. 6 months ago, I would occasionally get "low oil pressure" warning that would come on when I was parked, facing uphill (on an incline). It h… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,796 satisfied customers
I have a 2006 GMC Yukon XL Denali with 180K miles and a
I have a 2006 GMC Yukon XL Denali with 180K miles and a temporary knocking problem. I crank car from cold start, drive 3 miles @ 45mph to the interstate (70mph) and about 2 miles later, it sounds like… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
GMC Savanna: I have a 2000 GMC 1500 5.7 liter van with 160k
I have a 2000 GMC 1500 5.7 liter van with 160k miles, the oil pressure guage reads 40psi when the engine is cold. When the engine warms to normal temp, the oil pressure guage drops to 0psi, when I'm s… read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
18,028 satisfied customers
GMC Yukon XL Denali: 2006 Denali w/ 117k "low oil pressure"
2006 Denali w/ 117k "low oil pressure" with chiming when idleing. Have checked sensor, changed oil, changed gasket by oil filter. Need help the chiming will drive you crazy! Thanks… read more
Dave Nova
Dave Nova
GMC Technician
Associate Degree
929 satisfied customers
GMC Yukon Denali: Car - 2004 yukon denali awd 6.0 with 125,000
Car - 2004 yukon denali awd 6.0 with 125,000 mi. Im the original owner and have performed all required service intervals since day one, and always use synthetic. Appox 700 mi prior to problem I had ca… read more
Donald Knight
Donald Knight
Shop Manager/Technican
Associate Degree
527 satisfied customers
GMC: I have a 2002 GMC Envoy. When I stop at a light, the
I have a 2002 GMC Envoy. When I stop at a light, the oil pressure light comes (low oil pressure). The gauge drop to zero then back to middle when I move the vehicle. The oil level is normal (full)… read more
BigBob
BigBob
Service Manager
High School or GED
2,846 satisfied customers
GMC Envoy XL SLE: What would be the problem if when i am driving
What would be the problem if when i am driving after a couple miles the oil pressure goes all the way down and ill turn enigine off and back on oil pressure reads normal ???must i pay first ????… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,796 satisfied customers
GM envoy: i have a 2007 gmc envoy 4.2l. I need to know how
i have a 2007 gmc envoy 4.2l. I need to know how low the oil needs to get before the warning light comes on. Thanks.… read more
George H.
George H.
ASE MasterTechnician
Associate Degree
228 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x