GMC

GMC troubleshooting questions? Ask a mechanic for answers

Ask an Expert,
Get an Answer ASAP!

I am looking for a gmc v6 305 pistons. I want oversize so I…

Customer Question
I am looking for...

I am looking for a gmc v6 305 pistons

Mechanic's Assistant: Okay, I'll connect you to the mechanic to go over that information regarding your GMC. Before I do, is there anything else you want him to know?

I want oversize so I can bore it

Submitted: 6 months ago.Category: GMC
Show More
Show Less
Ask Your Own GMC Question
Answered in 5 minutes by:
1/3/2018
GMC Mechanic: KALAMYKID, Shop owner, tech replied 6 months ago
KALAMYKID
KALAMYKID, Shop owner, tech
Category: GMC
Satisfied Customers: 5,493
Experience: HAVE OWNED MY OWN SHOP FOR OVER THREE YEARS. I HAVE THE TOOLS AND SOFTWARE TO ANSWERE ALMOST ANY QUESTION CORECTLY.
Verified

What is the year, make, model, and engine size of your car/truck?

Ask Your Own GMC Question
Customer reply replied 6 months ago
1960 gmc 1/2 ton pickup 305 v6 engine
GMC Mechanic: KALAMYKID, Shop owner, tech replied 6 months ago

The best place for me to tell you where you can get a piston will be http://www.northerautoparts.com . They have everything you could want for your older truck engine.

Ask Your Own GMC Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a gmc mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask KALAMYKID Your Own Question
KALAMYKID
KALAMYKID
KALAMYKID, Shop owner, tech
Category: GMC
Satisfied Customers: 5,493
5,493 Satisfied Customers
Experience: HAVE OWNED MY OWN SHOP FOR OVER THREE YEARS. I HAVE THE TOOLS AND SOFTWARE TO ANSWERE ALMOST ANY QUESTION CORECTLY.

KALAMYKID is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Gm Tech (Cam)

Gm Tech (Cam)

GMC Mechanic

1,796 satisfied customers

GM Grand Master Technician 2007. 14 year experience.

Gary

Gary

ASE Certified Technician

1,588 satisfied customers

GCM master tech over 25 years

Dave Nova

Dave Nova

GMC Technician

929 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

GMC Technician

626 satisfied customers

16 years of experience

Ron Z.

Ron Z.

- GMC Tech -

279 satisfied customers

18+yrs experience. State Inspector & GMC Diagnostics/Repair

JFN1

JFN1

ASE Certified Technician

270 satisfied customers

GM Master Technician

George H.

George H.

ASE MasterTechnician

228 satisfied customers

15+ Years ASE Master Technician with Level 1 Certification

< Previous | Next >

Related GMC Questions
Turns over but does not run both relays ok. Before i chance
before i chance fuel tank and fuel pump everything was ok … read more
Edward Clayton
Edward Clayton
Associate Degree
1,033 satisfied customers
My 2004 GMC Sierra 2500hd rear brake caliper keeps braking
My 2004 GMC Sierra 2500hd rear brake caliper keeps braking and leaking brake fluid … read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
1,588 satisfied customers
I have a 1995 gmc sierra sl rwd with a v6 4.3l vin "Z". I
Hello, I have a 1995 gmc sierra sl rwd with a v6 4.3l vin "Z". I want to find top dead center using a "piston stop tool" to replace a distributor. I am pretty sure that "BOTH" of the 2 marks on the ha… read more
George H.
George H.
ASE MasterTechnician
Associate Degree
228 satisfied customers
gmc Sierra classic 1500: Hi Gary I have 350 block with casting
Hi Gary I have 350 block with casting number 10066036. And on the front by water pump numbers 1m08296vp. What information can u give me about this block.… read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
1,588 satisfied customers
GMC Yukon XL Denali: i have a 2006 denali xl with 140000 miles.
i have a 2006 denali xl with 140000 miles. Last week the low oil pressure alarm came on, so I took it to the GMC dealership. They checked the pressure at the oil filter and found that the oil pump and… read more
Vladgmru
Vladgmru
Automotive Electrician
Vocational, Technical or Trade Scho
1,586 satisfied customers
GM Yukon XL: my 2000 GMC Yukon makes a high pitch knock upon
my 2000 GMC Yukon makes a high pitch knock upon start. this lasts about 10 mins and then it goes away. but in the past day since driving it a bit the noise has gotten louder. I just recently chsnged t… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
I have a 2006 GMC Yukon XL Denali with 180K miles and a
I have a 2006 GMC Yukon XL Denali with 180K miles and a temporary knocking problem. I crank car from cold start, drive 3 miles @ 45mph to the interstate (70mph) and about 2 miles later, it sounds like… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
GMC K1500 4x4: Hi. I have an 1983 GMC K1500 4x4 pickup with
Hi. I have an 1983 GMC K1500 4x4 pickup with original gas 305-4bbl, US Fed-Spec. I am no longer able to read the Emissions decal, and have jumbled the hoses. Replacing all due to rot. Do you have acce… read more
Chris (aka-Moose)
Chris (aka-Moose)
GMC Technician
Vocational, Technical or Trade School
626 satisfied customers
GMC SLE 1500 1/2 TON: I HAVE AN 89 GMC TRUCK 305 AUTO V8 -
I HAVE AN '89 GMC TRUCK 305 AUTO V8 - NO ACCELERATION AND BURNS SPARK PLUGS (THREE SETS SO FAR)(BLACK ON ONE SIDE AND CLEAN ON THE OTHER) IT DOES START AND WILL IDLE BUT WHEN DRIVING IT DIES RIGHT OUT… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
1,124 satisfied customers
GMC sierra 15: I have a 86 gmc sierra swapping moters below
I have a 86 gmc sierra swapping moters below the spark plugs it is stampped s 010 can u help idenafy what that might be… read more
Dave Nova
Dave Nova
GMC Technician
Associate Degree
929 satisfied customers
1996 gmc 1500 305 no engine codes or trans codes but service
1996 gmc 1500 305 no engine codes or trans codes but service engine light stays on can shut it off with scanner comes right back… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,796 satisfied customers
GMC Sierra 1500 Classic SL: My 1985 GM 305 has rocker arm stud
My 1985 GM 305 has rocker arm stud bolts pulling out of the head.Is it possible to repair without pulling the heads off?… read more
supermechanic
supermechanic
Service consultant
Vocational, Technical or Trade Scho
10 satisfied customers
GMC K1500 Sierra XC 4x4: 1994 GMC Sierra K1500 XC, fresh rebuild
1994 GMC Sierra K1500 XC, fresh rebuild 5.7L .020 over cylinder bore, flattop hypereuretic pistons, RV cam 4L60e transmission. Threw a dtc 42 electronic spark timing error. What's the deal?… read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
1,588 satisfied customers
GMC 1/2 Ton Pickup: I am replacing a 1973 350 V8 chevrolet
I am replacing a 1973 350 V8 chevrolet motor in a 1961 GMC half ton truck that had a 305 V6, My question is what kind of front motor mounts could I use for this project? What would fit?… read more
Dave Nova
Dave Nova
GMC Technician
Associate Degree
929 satisfied customers
GMC K1500: i have an 81 GMC truck K1500 with a v8 305 with
i have an 81 GMC truck K1500 with a v8 305 with a 650 holly cabraitor. My question is that when my motorwarms up my choke light stays on but my choke on thee cab is open. what can i do to fix the prob… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
1,124 satisfied customers
GMC Sierra 1500 HD Pickup: My 2005 GMC truck has a clacking
My 2005 GMC truck has a clacking noise when I start it up on a cold morning. What do you think that is? The sound goes away after a while and the truck otherwise runs smooth.… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,796 satisfied customers
GMC Sonoma: Have a 1994 Snoma 2.2. Have had 3 rebuilt engines
Have a 1994 Snoma 2.2. Have had 3 rebuilt engines in about 8000mi. ALL knocked badly from the KNOWN piston fit problem.Have "so called" rebuild engine #3 here. Pulled it appart--piston clearance is .0… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
GMC: i took out 1 2 shift accumulator and spring was broken.put
i took out 1 2 shift accumulator and spring was broken.put in a new orange spring the other one was green. but it still slams hard into 2ndgear. the piston was ok.not stuck. what's next?… read more
Dave Nova
Dave Nova
GMC Technician
Associate Degree
929 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x