GMC

GMC Troubleshooting Questions? Ask a Mechanic for Answers

Ask an Expert,
Get an Answer ASAP!

GMC

2007 Acadia, turned off the car and it kept running. Had to…

Customer Question
2007 Acadia, turned off...

2007 Acadia, turned off the car and it kept running. Had to pull out the fuel pump breaker to get the car off.

Mechanic's Assistant: Have you ever replaced the fuel pump, or is this the original?

Original

Mechanic's Assistant: Are you fixing your Acadia yourself? What have you tried so far?

Nothing so far.

Mechanic's Assistant: Anything else you want the mechanic to know before I connect you?

That's it

Submitted: 2 months ago.Category: GMC
Show More
Show Less
Ask Your Own GMC Question
Answered in 5 hours by:
12/20/2017
GMC Mechanic: Todd Audette, A.S.E Certified Master Technician replied 2 months ago
Todd Audette
Todd Audette, A.S.E Certified Master Technician
Category: GMC
Satisfied Customers: 289
Experience: GMC Technician
Verified

Hi my name is*****'m an A.S.E Certified Master Technician with 30 + yrs GM experience. I'm reviewing you question and would be happy to assist you.

Ask Your Own GMC Question
GMC Mechanic: Todd Audette, A.S.E Certified Master Technician replied 2 months ago

Has this done this more than once?

Ask Your Own GMC Question
GMC Mechanic: Dan, ASE Master Technician replied 2 months ago
Dan
Dan, ASE Master Technician
Category: GMC
Satisfied Customers: 1,872
Experience: Dealer Auto Technician. ASE Master Certified, 15 years of experience
Verified

The most common cause for this issue would be a faulty ignition switch. I would start by scanning the vehicle for codes and if no codes are found replace the ignition switch.

Now that I have provided a full or partial answer a 5 star rating would be appreciated. You can do this by clicking on the stars in the upper right hand corner. Rating will not close out our chat session and we will be able to respond to each other as many times as needed for free. Providing a positive rating is the only way I receive credit for my work with you.

Customer service is my number one goal. Negative ratings do not result in a refund so If you’re not satisfied with the work we have done so far please respond more and let’s get your question answered!

Ask Your Own GMC Question
GMC Mechanic: Dan, ASE Master Technician replied 2 months ago
Do you still need help?
Ask Your Own GMC Question
Was this answer helpful?
Ask Dan Your Own Question
Dan
Dan
Dan, ASE Master Technician
Category: GMC
Satisfied Customers: 1,872
1,872 Satisfied Customers
Experience: Dealer Auto Technician. ASE Master Certified, 15 years of experience

Dan is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Gm Tech (Cam)

Gm Tech (Cam)

GMC Mechanic

1,696 satisfied customers

GM Grand Master Technician 2007. 14 year experience.

Gary

Gary

ASE Certified Technician

1,557 satisfied customers

GCM master tech over 25 years

Dave Nova

Dave Nova

GMC Technician

929 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

GMC Technician

583 satisfied customers

16 years of experience

Ron Z.

Ron Z.

- GMC Tech -

259 satisfied customers

18+yrs experience. State Inspector & GMC Diagnostics/Repair

George H.

George H.

ASE MasterTechnician

227 satisfied customers

15+ Years ASE Master Technician with Level 1 Certification

Don - Mo Lurch

Don - Mo Lurch

ASE Certified Technician

218 satisfied customers

GM, GMC, Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics

< Previous | Next >

Related GMC Questions
My 2012 GMC K2500 has had three Nox#1 sensors changed and
My 2012 GMC K2500 has had three Nox#1 sensors changed and after 300 miles shows PC11CB again and again … read more
Todd Audette
Todd Audette
A.S.E Certified Master Technician
289 satisfied customers
2006 GMC Envoy replaced front right sensor still has code
2006 GMC Envoy replaced front right sensor still has code also removed battery cables for 20 minutes… read more
Mechanic01
Mechanic01
2,019 satisfied customers
Have a 1979 GMC Jimmy and the rear window does not roll
Have a 1979 GMC Jimmy and the rear window does not roll down, Got new window glass, motor and actuator. … read more
eurotec
eurotec
Vice President / Manager
Associate Degree
11 satisfied customers
I have a 2015 gmc canyon. The climate control is all hot or
I have a 2015 gmc canyon. The climate control is all hot or all cold nothing in-between. … read more
Jerry Newton
Jerry Newton
Vocational, Technical or Trade Scho
2,066 satisfied customers
1991 gmc sonoma does not start until until rpm from starter
1991 gmc sonoma does not start until until rpm from starter is high even with fuel lpump relay bypassed. … read more
roy
roy
Associate Degree
3 satisfied customers
When headlight switch is on brings brake lights on solid and
when headlight switch is on brings brake lights on solid and blinkers will not work … read more
Mechanic01
Mechanic01
2,019 satisfied customers
I am ready to buy a 2011 Yukon Denali and want to be sure
I am ready to buy a 2011 Yukon Denali and want to be sure the options are the same as the dealer is advertising. The VIN is 1GKS2EEF2BR321991. How do I get the build sheet? … read more
Todd Audette
Todd Audette
A.S.E Certified Master Technician
289 satisfied customers
Yesterday while driving all guages were going in and out
yesterday while driving all guages were going in and out then staopped working. Door locks were locking and unlocking. Engine was running in lower gear while in drive. After stpped re-started with no … read more
Jerry Newton
Jerry Newton
Vocational, Technical or Trade Scho
2,066 satisfied customers
03 GMC Diesel -all of the dash gauges only work some of the
quot;03 GMC Diesel -all of the dash gauges only work some of the time. … read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
I have a 2009 Yukon with 151,000+ miles which is showing the
Hello! i have a 2009 Yukon with 151,000+ miles which is showing the yellow engine light warning as well as showing 0 oil pressure on the gauge. Is it possible to drive to the repair shop and what migh… read more
Chris (aka-Moose)
Chris (aka-Moose)
GMC Technician
Vocational, Technical or Trade School
583 satisfied customers
I have a 2014 GMC Terrain Denali with 52,000 miles on it and
I have a 2014 GMC Terrain Denali with 52,000 miles on it and my side detection light is staying on at all times... weather the vehicle is on or off..... It is causing all of the electrical turn on and… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,696 satisfied customers
No start replaced fuel pump still no start ,,, want to do
no start replaced fuel pump still no start ,,, want to do the crank sensor cant find where it is 3.5 liter in a 2005 montana sv6 … read more
Mechanic01
Mechanic01
2,019 satisfied customers
Exhaust gas temp. sensor #1 where is it? Egr has been
yes egr has been replaced and clogged, engine code from dealer said exhaust gas temperature sensor #1 … read more
Todd Audette
Todd Audette
A.S.E Certified Master Technician
289 satisfied customers
I have a 2015 GMC Denaili 2500hd the exhaust fluid is
Second opinion] I have a 2015 GMC Denaili 2500hd the exhaust fluid is showing 42 miles before dropping to 4 mph what can I do… read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,696 satisfied customers
All the air is coming out defrost - none to floor or in the
all the air is coming out defrost - none to floor or in the middle … read more
jim
jim
Vocational, Technical or Trade Scho
702 satisfied customers
I just changed the disc pad and tie rod end and now the
I just changed the disc pad and tie rod end and now the stearing is very tight … read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,696 satisfied customers
Exhaust valve on #6 will not hold compression 62000 miles on
Exhaust valve on #6 will not hold compression 62000 miles on car … read more
Gary
Gary
ASE Certified Technician
Vocational, Technical or Trade Scho
1,557 satisfied customers
Any tips or tricks I should know replacing the fuel pump
Any tips or tricks I should know replacing the fuel pump module? I've done many, just never on this particular make / model.… read more
Todd Audette
Todd Audette
A.S.E Certified Master Technician
289 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x