GMC

GMC troubleshooting questions? Ask a mechanic for answers

Ask an Expert,
Get an Answer ASAP!

Will not start hook it up to the scanner and i get two fault…

Customer Question
Will not start hook...

Will not start hook it up to the scanner and i get two fault b1325-03 ,b1011

Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded?

New battery i install and recharged the terminal is clean

Mechanic's Assistant: What is the model of your '03 GMC?

2008 gmc acadia slt 52420 miles

Mechanic's Assistant: Are you fixing your Acadia yourself? What have you tried so far?

I'm fixing it my self i change the spark plugs, fuel injectors ,crankshaft position sensor ,for a p0300 p0204,p0206 code and injector harness

Mechanic's Assistant: Anything else you want the mechanic to know before I connect you?

Replace the alternator and the cam sensors

Submitted: 10 months ago.Category: GMC
Show More
Show Less
Ask Your Own GMC Question
Answered in 3 minutes by:
9/24/2017
GMC Mechanic: JFN1, ASE Certified Technician replied 10 months ago
JFN1
JFN1, ASE Certified Technician
Category: GMC
Satisfied Customers: 5,694
Experience: GM Master Technician
Verified

B1011 should be ignored, it can be caused by a long engine crank.

B1325-03 indicates battery voltage that is out of range, and can be caused by using a battery charger or jump pack to start the car. Are you using anything like that?

Ask Your Own GMC Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a gmc mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam)
Gm Tech (Cam), GMC Mechanic
Category: GMC
Satisfied Customers: 1,815
1,815 Satisfied Customers
Experience: GM Grand Master Technician 2007. 14 year experience.

Gm Tech (Cam) is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Gm Tech (Cam)

Gm Tech (Cam)

GMC Mechanic

1,815 satisfied customers

GM Grand Master Technician 2007. 14 year experience.

Gary

Gary

ASE Certified Technician

1,588 satisfied customers

GCM master tech over 25 years

Dave Nova

Dave Nova

GMC Technician

929 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

GMC Technician

626 satisfied customers

16 years of experience

Ron Z.

Ron Z.

- GMC Tech -

279 satisfied customers

18+yrs experience. State Inspector & GMC Diagnostics/Repair

JFN1

JFN1

ASE Certified Technician

5,694 satisfied customers

GM Master Technician

George H.

George H.

ASE MasterTechnician

228 satisfied customers

15+ Years ASE Master Technician with Level 1 Certification

< Previous | Next >

Related GMC Questions
My GMC acadia has a strange problem, the engine starts fine
Hi, my GMC acadia has a strange problem , the engine starts fine but after a few minutes the engine just dies. Also sometimes while I am driving at 2000 2500 rpm the engine just stalls . it seems like… read more
Nate
Nate
Automotive Technician
Automotive Trade School Degree
84 satisfied customers
Service Stabilitrak, Service Traction Control, Traction
Service Stabilitrak, Service Traction Control, Traction Control Off messages intermittently; Theft Deterrent Disabled light intermittently; Remote Start feature does not work intermittently, ignition … read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,815 satisfied customers
My acadia gmc turns off automatically while I'm driving I'm
My acadia gmc turns off automatically while I'm driving I'm not sure if it's because of the transmission or the ecu/ecm … read more
Tool Hut
Tool Hut
Owner
519 satisfied customers
I have a 2003 GMC Sierra with a 4.8L engine that is cranking
I have a 2003 GMC Sierra with a 4.8L engine that is cranking strong, but not starting. So far I have replaced the fuel pump, (the old one was dead when I bench tested), fuel filter, cleaned out gas ta… read more
mike switzer
mike switzer
721 satisfied customers
Engine will not start. The fuse box was dead and had poor
yes, the fuse box was dead and had poor connection … read more
Gary
Gary
Senior Technician
Vocational, Technical or Trade School
102 satisfied customers
2008 GMC Acadia The voltage is reading on the gauge anywhere
2008 GMC Acadia The voltage is reading on the gauge anywhere from 12.5 v to 16.5v. When ever it goes low or goes high it says stabikitrak off. Is this a bad alternator?… read more
kwiggins29059
kwiggins29059
Associate Degree
219 satisfied customers
It´s like a GMC Acadia 3.6 2008 ( really it´s a Suzuki xl7
hi it´s like a GMC Acadia 3.6 2008 ( really it´s a Suzuki xl7 3.6 2008 , but are the same of the Acadia ) problem are p0301 p0303 and p0305 and P0106 , this car had like a 20 days that in other mechan… read more
Ivan Alvarez
Ivan Alvarez
Lead technician
192 satisfied customers
My 2009 gmc acadia, Will crank but won't start. I have
Will crank but won't start. I have replace the crank position sensor and all 6 spark plugs and a new battery. … read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
5,582 satisfied customers
I have a 2008 GMC Acadia SLT that has started having a
I have a 2008 GMC Acadia SLT that has started having a issue. The problem first started as an intermittent rough idle where the car would sound like it was going to die, then would overcompensate with… read more
BOBBYSS
BOBBYSS
TECHNICIAN/ADVISOR
Associate Degree
8,343 satisfied customers
I am getting a P0122 and P0300 code in a 2001 Gmc Sierra
I am getting a P0122 and P0300 code in a 2001 Gmc Sierra 1500 (V8-6.0L) 4x4. The 'check engine' light is flashing constantly while the vehicle has a rough idle. When I cleared the light, it comes back… read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
2005 GMC YUKON DTC P0200 AND P0300, spark plug replaced, the
2005 GMC YUKON DTC P0200 AND P0300, spark plug replaced, the same problem, sometimes detect misfired in 1 sometimes in 2 , 7 and 8 SOMETIMES.… read more
mike switzer
mike switzer
721 satisfied customers
2008 GMC Acadia. the service stabilitrak and traction
2008 GMC Acadia. the service stabilitrak and traction control turned off light appears. Have a misfire on cyl 1. also have a code p0300. I changed the coil and the mis fire is stil there.… read more
mike switzer
mike switzer
721 satisfied customers
I have a gmc acadia SLT 2, 2009 and got stuck in a very
Hi, I have a gmc acadia SLT 2, 2009 and got stuck in a very difficult situation. After engine warms up to its optimum temperature, car would jerk and door gets locked unlocked followed by engine shut … read more
Gm Tech (Cam)
Gm Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
1,815 satisfied customers
I have a 2008 GMC Sierra 2500hd, and I have been having
Hello There! I have a 2008 GMC Sierra 2500hd, and I have been having problems with a random misfire I ran the scanner and all I have is P0300 and I noticed that if I disconnect the Barometer air press… read more
BOBBYSS
BOBBYSS
TECHNICIAN/ADVISOR
Associate Degree
8,343 satisfied customers
GMC Sierra 1500: Hi Eric. I have a no start issue with my 97
Hi Eric. I have a no start issue with my 97 GMC 5.7. It cranks and I can hear the fuel pump engage but still no start. Did a fuel pressure test and it jumps to about 60-63 psi but loses pressure immed… read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
GMC Sierra 1500: 2008 GMC Sierra SLT / check engine light came
2008 GMC Sierra SLT / check engine light came on, then off, back again and now the remote start doesn't work. Filled gas tank today, tightened cap. have not checked fluids' oil, coolant just yet. mayb… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
GMC Sonoma 4x2: 1996 gmc sonoma 2.2l rear wheel drive. Replaced
1996 gmc sonoma 2.2l rear wheel drive. Replaced engine with a rebuilt engine No spark no injection pulse New parts: engine, clutch pedal switch, coils, spark plug wires, icm, crank sensor, cam sensor,… read more
GM Bob
GM Bob
Automobile Technician
High School or GED
1,061 satisfied customers
GMC Sonoma Pickup 1999 gmc sonoma, after we changed wire,
1999 gmc sonoma, after we changed wire, spark plug, coil, but still misfiring. So we changed pcm, engine runing great no misfiring, but code p1336 came out. So we did CKP variation learn, cleared code… read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x