How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam), GMC Mechanic
Category: GMC
Satisfied Customers: 1686
Experience:  GM Grand Master Technician 2007. 14 year experience.
10949255
Type Your GMC Question Here...
Gm Tech (Cam) is online now
A new question is answered every 9 seconds

Service stability light is on and service airbag light is on

Customer Question

Service stability light is on and service airbag light is on after I changed the steering column bearing
JA: Is anything interfering with the seatbelt latch?
Customer: No
JA: What is the model/year of your GM?
Customer: 2004 gmc Yukon
JA: Are you fixing your Yukon yourself? What have you tried so far?
Customer: Yes I have tried to have it scanned and I returned no codes other than drivers side low voltage or connection
JA: Anything else you want the mechanic to know before I connect you?
Customer: I may have a bad ball joint and I also just replaced the rotary and pads and I had a leak that I repaired in the transfer case
Submitted: 4 months ago.
Category: GMC
Expert:  Chris (aka-Moose) replied 4 months ago.

Welcome, I'm Chris (aka Moose). I'm here to help 365 days a year, but not every hour of the day. I try to prevent delays as much as possible. Please understand I am not there and can only advise based on what you tell me. Let's get started.

Will your scan tool even access these modules, most generic tools will not.