How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, ASE Certified Technician
Category: GMC
Satisfied Customers: 16856
Experience:  GCM master tech over 25 years
Type Your GMC Question Here...
Gary is online now
A new question is answered every 9 seconds

Aran ,it started out w/ oil gauge and has excelled to no

Customer Question

Aran ,it started out w/pinner oil gauge and has excelled to no idiot lights or gauges. Asked at dealer said bring in we'll check it question is does cluster have to be linked to computer by dealer? have gone through fuses, was going to buy kit to replace all mini motors, not sure what to do now?
JA: Most vehicles have two fuse panels. Have you located both?
Customer: one at left a piller on inside wasn't aware of second
JA: What is the model/year of your GM?
Customer: 04 serria
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: tested inside fuses where is second fuse box?
JA: Anything else you want the mechanic to know before I connect you?
Customer: If dealer has to set up cluster after motors are replaced?
Submitted: 11 months ago.
Category: GMC
Expert:  Gary replied 11 months ago.

I am sorry for the long wait

if you replace the stepper motors in the cluster for the needle gauges no you do NOT need to program the cluster afterwards

you can always get me back for FREE for any follow up any time with this question even after you rate me here at Justanswer

if you have any questions please ask as i do not get credit for my work until you rate me here at Justanswer

Related GMC Questions