How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask thomas3767 Your Own Question
thomas3767, Other
Category: GMC
Satisfied Customers: 1543
Experience:  I have been a automotive expert for many years
Type Your GMC Question Here...
thomas3767 is online now
A new question is answered every 9 seconds

I have a 2011 gmc sierra 1500, my altenator went screwy and

Customer Question

i have a 2011 gmc sierra 1500, my altenator went screwy and threw a lot of engine codes. I installed the new altenator erased all of the codes and everything was good except for the***** I put the new switch in the dash and still no luck. I have no indicator light on the switch.
Submitted: 1 year ago.
Category: GMC
Expert:  thomas3767 replied 1 year ago.

Have you checked all the fuses to the four wheel drive?

It is fuse #19 in fuse box under hood.

Customer: replied 1 year ago.
all the fuses are good
Expert:  thomas3767 replied 1 year ago.

Ok does the ECM have any codes in it now?

Customer: replied 1 year ago.
CO 392 is what keeps coming up as soon as i delete it comes right back up.

Related GMC Questions