How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, ASE Certified Technician
Category: GMC
Satisfied Customers: 17023
Experience:  GCM master tech over 25 years
19513769
Type Your GMC Question Here...
Gary is online now
A new question is answered every 9 seconds

How do I replace the neutral safety switch in my 2002

Customer Question

how do I replace the neutral safety switch in my 2002 venture van LT ?
Submitted: 2 years ago.
Category: GMC
Expert:  Gary replied 2 years ago.

I am sorry for the long wait

the neutral switch is located on the top back side of the transmission almost under the master cylinder area on top of the transmission should take @ half hour to change it

this is how to change it

  1. Apply the parking brake.
  2. Block the wheels.
  3. Shift the transmission into Neutral.
  4. Remove the throttle body air inlet duct.
  5. Use a flat-bladed tool in order to remove the automatic trans axle range selector cable from the cable lever.
  6. Remove the electrical connectors.
  7. Remove the automatic trans axle range selector lever.
  8. Remove the PNP switch bolts.
  9. Remove the PNP switch.
Expert:  Gary replied 2 years ago.

how are you making out ?