GM

GM repair problems? Ask a GM repair expert now.

Connect one-on-one with {0} who will answer your question

Related GM Questions
04 GMC yukon with 5.3l vortec pulls p0306 then changes to
04 GMC yukon with 5.3l vortec pulls p0306 then changes to p0300 while driving. Checked plugs wires and coils and bolts change. When idling there is no problem. Only when driving and reach 40 to 50 mph… read more
Chris (aka- Moose)
Chris (aka- Moose)
GMC Technician
Vocational, Technical or Trade School
330 satisfied customers
A misfire on my 5.3. Misfire occurs after engine is warm and
A misfire on my 5.3. Misfire occurs after engine is warm and when I'm waiting at a stop light. Plugs, wires, ignition coils have been changed. Throttle body has been cleaned. What am I missing? … read more
Andrew
Andrew
Master Diagnostic Technician
Associate of Occupational in Automotive Technology
564 satisfied customers
2005 holden vz crewman. we have identified that there is no
2005 holden vz crewman. we have identified that there is no power getting to the ignition coil for No6 cylinder ( Left rear from drivers seat). Where does the power supply for the coil come from? Are … read more
Gary
Gary
Gold Certified GM Technician
Vocational, Technical or Trade School
2,973 satisfied customers
Engine misfire on cylinders 2, 4, 6. 133,000 miles. steady
133,000 miles. steady misfire on 2, 4, 6. Have replaced plugs, wires, checked coil packs by switching their positions, checked fuel injectors by switching their positions, have replaced the catalytic converter. Vehicle is a 2007 GMC Yukon Denali. … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,563 satisfied customers
GM Suburban: Hey I'm Larry.I have a 08 Gmc Suburban 5.3L. It
Hey I'm Larry.I have a 08 Gmc Suburban 5.3L. It has a misfire on #6 cylinder. compression the sane as others 180psi,Valvetrain,springs,cam rocker arms all look good.New sparkplug,coil switch.stil a cy… read more
GM Tech (Cam)
GM Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
5,987 satisfied customers
GM Sierra: I have a 1999 gmc sierra 1500 5.3l, has no power
I have a 1999 gmc sierra 1500 5.3l, has no power at all when I put it in gear I bogs down and when i accelerate it doesn't go, it barley goes, has a bad misfire, I replaced wires, coils and plugs, and… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
GM: Got a friends 02 Olds Silhouette - 3.4. When I step on
Got a friends 02 Olds Silhouette - 3.4. When I step on the gas hard, there is no power. My scan tool shows the upstream o2 around 30mv - running lean. If I hold it this way for a little while, like go… read more
mechanic110
mechanic110
Auto Technician
Vocational, Technical or Trade Scho
135 satisfied customers
GM: i have a 1995 gmc jimmy withi 4.3 eng spider injection
i have a 1995 gmc jimmy withi 4.3 eng spider injection autoXXXXX vin 1gkdt13w4s2545095 after it is at operating temp when accelerating med to hard it will cut out and lose power if you let of the gas … read more
Dave Nova
Dave Nova
Auto Dealership Owner
Associate Degree
18,417 satisfied customers
2004 gmc sierra 1500: check engine code of p0171 and p0174 do u
i have a 2004 gmc sierra 1500 4x4 with a 5.3L i have a check engine code of P0171 and P0174 do u no what they are… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,873 satisfied customers
1998 gmc yukon: getting fuel..Intermittent mis..rebuilt..o2 sensor
1998 gmc yukon #7 cylender running cold not getting fuel. Intermittent mis cylender #5. Has had bank one running lean code, I rebuilt the front exaust was cracked at mid flange the mis was there befor… read more
Dave Nova
Dave Nova
Auto Dealership Owner
Associate Degree
18,417 satisfied customers
p300: error codes../02, po175/01 and po175/03(pending)
I have error codes PO300/02, PO175/01 and PO175/03(pending) on my GMC Jimmy. What are the most likely problems?… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
36,401 satisfied customers
2004 sierra 1500: rough idle problem..stalled..emissions..maf sensor
I have a 2004 sierra 1500 Z71 5.3, it has a rough idle problem but it only does it like every other time i let it idle (if that) and it has stalled a few time when doing this i think it is emissions b… read more
GM Tech (Cam)
GM Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
5,987 satisfied customers
2003 chevy: the injector pwm bank..runs great..misfires..runs good
I have a 2003 chevy tk 1500 4.8. When the injector pwm bank 1 avg and injector pwm bank 2 avg are close to the same the truck runs great but when pmw bank 1 reads 3.78 and pmw bank 2 reads 1.78 it mis… read more
Ironmike
Ironmike
ASE Master ,Ford Certified Master Tech
Vocational, Technical or Trade Scho
3,562 satisfied customers
99 GMC: 000 miles..I was getting a hard to start and a rough idle
99 GMC Sierra 5.3V8, 98,000 miles. I was getting a hard to start and a rough idle. I changed the spark plugs (first time) and replaced with new iridiam plugs. The #4 plug was covered with carbon. all … read more
Dave Nova
Dave Nova
Auto Dealership Owner
Associate Degree
18,417 satisfied customers
Chevy Silverado 1500: V8..it runs great when its..light comes
I have a "99 Chevy Silverado 1500 with a 5.3L Vortec V8. I warm weather it runs great when it's warm, but when it's cold the idle speed surges from about 400 to 800RPM, the service engine soon light c… read more
Shane
Shane
Vocational, Technical or Trade Scho
173 satisfied customers
new 5.3L H.O. put in my 2001 Silverado...new fuel injectors..new coils
I just had a new 5.3L H.O. put in my 2001 Silverado. I had over 201000 miles on the 5.3 that was in it. My question is, should I put new fuel injectors and new coils in the new motor? The mechanic at … read more
Carhelp4u
Carhelp4u
GM Service Training
2,560 satisfied customers
2003 GMC: 4wd p/..Misfires bank one, mainly cyl 1..smoke checked
2003 GMC Sierra K1500 4wd p/u 5.3l 81,536miles. Misfires bank one, mainly cyl 1. some on 3,5 and 7. Have smoke checked for vacuum leaks hot and cold. none found. have moved from one bank to the other … read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,714 satisfied customers
2003 GMC Sierra 5.3 liter. Random multiple misfires bank 1.
2003 GMC Sierra 5.3 liter. Random multiple misfires bank 1. Cylinder one always worse. moved plug, coil, wire to bank 2. smoke tested for vacuum leak. fuel psi 50 running. each injector when pulsed (K… read more
GM Tech (Cam)
GM Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
5,987 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

GMC Mechanic

5,987 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

GMC Technician

1,563 satisfied customers

15 years gm master tech/15 years ASE master tech

car tech

car tech

ASE Certified Technician

449 satisfied customers

25 year master tech and shop owner

Chris (aka- Moose)

Chris (aka- Moose)

GMC Technician

330 satisfied customers

24 years of experience diagnosing & repairing

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

211 satisfied customers

ASE Master Tech 20+ Years

Amedee

Amedee

GMC Technician

563 satisfied customers

ASE certified tech with advanced level specialist. Wisconsin certified emissions state inspector

Anthony

Anthony

GMC Technician

489 satisfied customers

GM Certified

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x