GM

GM repair problems? Ask a GM repair expert now.

Connect one-on-one with {0} who will answer your question

Related GM Questions
2000 gmc yukon denali 5.7 liter. when start up engine pedal
2000 gmc yukon denali 5.7 liter. when start up engine pedal goes to floor. can see bubbles in rear reservoir when pumping brakes with engine running. turn engine off and pump pedal couple times bubble… read more
chevygeorge
chevygeorge
ASE Certified Master Technician
49 satisfied customers
GM suburban: 1999 chevy suburban 1500 350 engine - brake pedal
1999 chevy suburban 1500 350 engine - brake pedal spongey and bleeds to floor - changed master cylinder attempted to bleed - rt front bleeder valve rusted into caliper broke off -- suggestions -… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,324 satisfied customers
i changed my rotors and the passenger rear caliper and now
i changed my rotors and the passenger rear caliper and now the breaks go to the floor and nothing is leaking… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,324 satisfied customers
I have a 1998 gmc sierra 1500 I replaced the front pads and
I have a 1998 gmc sierra 1500 I replaced the front pads and lost the the brakes put the old pads back on and got the brakes back. what would cause this?… read more
Eric
Eric
Automotive Repair Shop Manager
36,011 satisfied customers
GM silverado: is there a specific brake bleeding sequence for
is there a specific brake bleeding sequence for the 07 gm silverado classic 2500hd 4x4 diesel powered… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
2006 GMC Sierra 1500: V8..Replaced pads, rotors, calipers
I have a 2006 GMC Sierra 1500 Pick up. 4.3l V8. Replaced pads, rotors, calipers - twice already, also replaced tie rod ends, front flex lines. After driving for about 10 miles, the front brakes start … read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
VIBE: FIRE,BRAKES WERE STUCK SO WE REPLACED PADS..rotor..HOSES
WE HAD A 2007 PONT VIBE BROUGHT TO US MON. WITH RF WHEEL ON FIRE,BRAKES WERE STUCK SO WE REPLACED PADS ,RF ROTOR CALIPER&BOTH BRAKE HOSES,DROVE THE CAR AND EVERYTHING WAS FINE,LATER IN THE DAY THE SAM… read more
Eric
Eric
Automotive Repair Shop Manager
36,011 satisfied customers
1999 grand am gt: front brake..leaks..i have to do with the abs sys
1999 grand am gt i replaced the front brake cluplers and a can not get them to breed up?no leaks,is there something i have to do with the abs sys?… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,324 satisfied customers
Brake pads..chev..a metal casing behind the master cylinder)..calipers
I have replaced all four roters and brake pads on a 2003 chev HD. (There is a fluid line between the power stering pump amd a metal casing behind the master cylinder). I used a C clamp on each of the … read more
Don Knight
Don Knight
Shop Manager/Technican
Associate Degree
1,471 satisfied customers
2000 Sonoma: pumping..pedal..no leaks but still no pressure at caliper
Replaced rear brake pads on 2000 Sonoma. Started pumping brakes when pedal went to floor and lost all pressure. Can find no leaks but still no pressure at caliper. No leak at master cyl. connection to… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
2000 oldsmobile bravada: calipers..pads..rotors..200 cars
2000 oldsmobile bravada I changed the rear calipers, pads and rotors system seems like it went dry and needs bled is there a special way of doing this I am using the old school method I have probably … read more
Triston
Triston
High School or GED
1,613 satisfied customers
98 Suburban: brake pedal..I replaced the master cyl
I have a '98 Suburban, 2500. On hard stops, the brake pedal can be pushed to the floor (doesn't have a hard, firm stop to it). I replaced the master cyl. but it still has issues. Also, the break fluid… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,561 satisfied customers
1995 GMC Sierra 3500: brakes..rebuild..Booster,Master Cylinder..Hoses
On a 1995 GMC Sierra 3500 4x4 after driving a couple miles and useing the brakes the front wheels get very hard to turn if I let set 20 min. or so the presser let off some. I have put on a rebuild Hyd… read more
Dan
Dan
High School or GED
2,257 satisfied customers
yukon: changed the front brake pads..my 04..break pedal..brake light
I just changed the front brake pads on my 04 yukon, now the break pedal just goes to the floor and service brake light is on, any suggestions?… read more
Eric
Eric
Automotive Repair Shop Manager
36,011 satisfied customers
2001 93..rotors..caliper..gap between the piston..comes back
i have a 2001 93 and i just replaced the front brake pads and rotors. after doing this i have a very soft pedal that needs to be pumped to stop. I looked at the caliper and pads and i see a gap betwee… read more
ase_master327
ase_master327
Owner & Student
High School or GED
3,214 satisfied customers
99 GMC: hoses calipers, etc..abs set up on the left frame rail
Hello, I have a 99 GMC Savanna 3500. My right front line rusted out so I replaced all the lines, hoses calipers, etc in the front, all is good there, but I cant get the rears to bleed. I have fluid in… read more
mcgruder73
mcgruder73
Auto Technician
Associate Degree
1997 gmc: brakes..master cylinder..power booster angle valve, calipers
I have a 1997 gmc sierra that I have a soft pedal problem, feels like I will loose brakes any moment. I have replaced the master cylinder, power booster angle valve, calipers and it gets worse not bet… read more
michael
michael
High School or GED
667 satisfied customers
2003 gmc yukon denali: awd..rotors..disconnected..the calipers or any
I have a 2003 gmc yukon denali awd. I just changed the front brake pads and rotors. no lines were disconnected from the calipers or any where else. i did however open the abs bleeder valve slightly to… read more
Roadside Jerry
Roadside Jerry
Auto Expert on Just Answer
Vocational, Technical or Trade Scho
2,945 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

GMC Mechanic

5,854 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

GMC Technician

1,561 satisfied customers

15 years gm master tech/15 years ASE master tech

car tech

car tech

ASE Certified Technician

449 satisfied customers

25 year master tech and shop owner

Chris (aka- Moose)

Chris (aka- Moose)

GMC Technician

234 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

187 satisfied customers

ASE Master Tech 20+ Years

Anthony

Anthony

GMC Technician

489 satisfied customers

GM Certified

Amedee

Amedee

GMC Technician

470 satisfied customers

ASE certified tech with advanced level specialist. Wisconsin certified emissions state inspector

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x