How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), GMC Mechanic
Category: GM
Satisfied Customers: 5789
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your GM Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

It turn over but want start, yes, 2001 gmc yukun denali 6.0,

Customer Question

it turn over but want start
JA: Will the headlights turn on? Is the battery fully charged?
Customer: yes
JA: What is the model/year of your GM?
Customer: 2001 gmc yukun denali 6.0
JA: Are you fixing your Yukon Denali yourself? What have you tried so far?
Customer: cam and crank sencer
JA: Anything else you want the mechanic to know before I connect you?
Customer: replace every thing new
Submitted: 1 month ago.
Category: GM
Expert:  Gary replied 1 month ago.

Welcome! My name is ***** ***** I will do my best to assist you with this problem.

Expert:  Gary replied 1 month ago.

with the key ON is the check engine light lit up in the dash ?

if so when cranking it over will it somewhat run on starting fluid or carb cleaner being sprayed down the throttle body butter fly ?

Customer: replied 1 month ago.
no but it have gas
Expert:  Gary replied 1 month ago.

is there spark at the spark plugs when cranking it over ?

this engine needs spark and fuel and compression to run we need to see which of the 3 is missing

Customer: replied 1 month ago.
I put new cam and cran cencer
Expert:  Gary replied 1 month ago.

is there spark at the spark plugs when cranking it over ?

Customer: replied 1 month ago.
No
Expert:  Gary replied 1 month ago.

any access to a scan toll to see if the computer is reading an RPM when cranking it over ?

any codes set ?