How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), GMC Mechanic
Category: GM
Satisfied Customers: 5787
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your GM Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I am under the expectation you are still working on this.

Customer Question

I am under the expectation you are still working on this.
Submitted: 2 months ago.
Category: GM
Expert:  Chad Farhat replied 2 months ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Expert:  Chad Farhat replied 2 months ago.

Hey how are you

I can see the other post you had , but tell me what year model and engine GMC you have and tell what is the issue ,I can try to help

I apologizes if you been waiting on answer but i m here now if you like

Please let me know

Thank You

Chad Farhat

ASE Certified Technician

Customer: replied 2 months ago.
Hi Chad
I had an open ticket Eric responded asked me for a long list of items I filled the list he completed the ticket with out answering the question. Can you see my other tickets
Customer: replied 2 months ago.
2006 has an ls3 6.0 liter truck engine just like the Silverado 1500
Expert:  Chad Farhat replied 2 months ago.

let me check it want let me pull it up ,i be right back,

i hate for you to tell me again

Expert:  Chad Farhat replied 2 months ago.

it want let me open it , do not know why ,

what is the main issue , engine ,trans electrical, any fault codes etc ?

did you go back to his post and check back with him ?

Customer: replied 2 months ago.
he just kind of vanished. Please reopen the ticket.
This is a new project. No faults just a tired motor.
I am after the ten speed and the vvt motor as I am after the mileage upswing. The added ponies won't hurt the truck weighs in at 7035 all wheel drive
Expert:  Chad Farhat replied 2 months ago.

ok I m going to send it in to car moderator to reopen it ,I can do it on my end, we are independ expert on site and do not have acess to that

Customer: replied 2 months ago.
Ok thanks I have done allot of research already but some things gm won't show us dumb customers.
Expert:  Chad Farhat replied 2 months ago.

so you thinking replacing the motor correct ?

Customer: replied 2 months ago.
The setup from Chevy create has the lt4 and trans as a kit so they independently to the ecu in the truck. My challenge is to get the throttle positioning data engine speed to the abs. System on the hubs. The air bags I have been lead to believe are stand alone and as long as they have power should function. The cruise control and dash display I am not sure how to handle. I have to also address the power steering as the vette uses electric and I am presently fluids powered
Customer: replied 2 months ago.
Some typos working off my phone
Expert:  Chad Farhat replied 2 months ago.

well what you trying to do can be accomplished ,but it will be hard for me to go thru this process here ,I m sorry , I will opt out for other experts for you maybe they can help on this one