How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), GMC Mechanic
Category: GM
Satisfied Customers: 5787
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your GM Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Changed trans filter on GMC Canyon (2008), now it does not

Customer Question

changed trans filter on GMC Canyon (2008), now it does not move in drive or reverse.
JA: How many miles are on the car? How has your mileage been lately?
Customer: 100,000 miles, mileage good
JA: Tell me a bit more about what's going on so he can help you best.
Customer: added 3 quarts of fluid after trans filter change. Ran truck but fluid level hard to read, over-fill maybe?
JA: Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: Tried to drain some of the fluid, but still can't get a good reading. It still shows over the fill line
JA: Is there anything else the GM Mechanic should be aware of about your GM?
Customer: Should fluid level stop at recommended line, or does fluid splash up the dipstick?
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the GM Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: GM
Expert:  john -aka eauto replied 1 year ago.

sounds like the filter is not locked in causing it not to suck the fluid up...I would drop the pan and double check