How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Master Tech
Category: GM
Satisfied Customers: 12803
Experience:  ASE Master Tech, 35 years, Foreign/Domestic repairs
Type Your GM Question Here...
Randall C is online now
A new question is answered every 9 seconds

GM Envoy: 2003 Envoy. Low pressure switch replacement. Do

This answer was rated:

2003 Envoy. Low pressure switch replacement.

Do I just unscrew the old one and put in the new one?
Hello, I am Randall

the fitting the switch screws onto has the schrader valve in it, like a tire valve stem
Yes,, you unscrew it, you may lose a quick short spurt of 134 but nothing to worry about
You need to be sure a new oring is put on the fitting and that oring has some light film of oil on it so the seal is good

Randall C and other GM Specialists are ready to help you