GM

GM repair problems? Ask a GM repair expert now.

Connect one-on-one with {0} who will answer your question

Related GM Questions
Heelo. I have a 2004 YUKON DENALI, which we owned since
Hello, I have a 2004 YUKON DENALI, which we owned since brand new. It has been an excellent truck, but now the transmission goes to 1st gear and then to the 3rd. We don't have 2nd or the 4th (OD). The reverse gear works ok, but it takes a few seconds longer than normal to get into the gear. However, we always had the reverse issue and after 50,000 Miles and it has been almost the same. Therefore, I don't think they slipping has much to do with the reverse issu. So, we have 163,000 Mike's on the vehicle. Could this be a fuse or relay problem or do we need to possibly re build the transmission? Thank you for your consideration to answer my question. … read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,156 satisfied customers
1999 GMC Envoy, shifts fine for about a half hour then gets
1999 GMC Envoy, shifts fine for about a half hour then gets stuck in 3rd gear?????????? Or I can drive it 50 minutes highway and a few back rds to buddies house, shut it off for a few minutes, then st… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
i just replaced the engine in a 1999 gmc yukon denalie it has
i just replaced the engine in a 1999 gmc yukon denalie it has a rebuilt transmission with less han 500 miles on it , after installing the new engine i have no 3rd or 4th gear i checked for broken wire… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
GM trailblazer ext ls: i have a 2003 chevy trailblazer 4.2
i have a 2003 chevy trailblazer 4.2 v6 4x4 im having problems shifting from 3rd to 4th i can manualy shift 1st -2nd- and it revs rpms for 3rd let off gas and it seems to shift but cant get into fourth… read more
mechanic110
mechanic110
Auto Technician
Vocational, Technical or Trade Scho
135 satisfied customers
GM Z71 (1500 Serria): I have a 2002 GMC serria Z71 4x4 with
I have a 2002 GMC serria Z71 4x4 with an automatice transmisson. Problem: When shifting from 2nd to 3rd and higher the RPM will surge up to 4000 rmps and i have to let my foot of the gas to get the tr… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
1995 Z-71,5.7L,4x4,A/T. Have no 1st gear..I test the controll modules
1995 Z-71,5.7L,4x4,A/T. Have no 1st gear, all others seem to be ok. How can I positively identify transmission model and can I test the controll modules?… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
2003 gmc sierra 1500: v8..automatic transmission..engage..it shifting
I have a 2003 gmc sierra 1500 z71 v8 w/automatic transmission. acouple months ago it all of a sudden would not shift from 1st too 2nd. I have to bring the rpms up to 3,000 then let off the gas when th… read more
GM Tech (Cam)
GM Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
5,987 satisfied customers
1500 sierra: automatic transmission 4wd..scanner..tranny
I have a 2003 GMC 1500 sierra automatic transmission 4wd, transmission won't shift into high at all and you really have to speed up and let off to get it to shift into 3rd. Is my transmission fried, c… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
2004 chevy suburban: wont shift..4th..Engine revs..it is slipping
2004 chevy suburban transmission. It won't shift into 3rd or 4th. Engine revs and sounds like it is slipping. Reverse, 1st and 2nd seem to work fine.… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
1988 gmc: transmission skips 2nd gear, goes..reverse
My 1988 gmc 3500, transmission skips 2nd gear, goes from 1st straight to third. reverse is fine but no other gears are working?… read more
Joe  Barfield
Joe Barfield
Master High-Tech
Master Aamco
1,359 satisfied customers
My 2000 gmc sierra automatic transmission has lost 2nd and 4th gears.
my 2000 gmc sierra automatic transmission has lost 2nd and 4th gears. it will shift from 1st to 3rd and then will just free-wheel when i let the gas up and will not go into 4th… read more
Joe  Barfield
Joe Barfield
Master High-Tech
Master Aamco
1,359 satisfied customers
2001 GMC: pu with 3.5 liter engine,automatic transmission..engage
I have a 2001 GMC sierra pu with 3.5 liter engine,automatic transmission. When I shift it into drive, it sometimes hessitates to engage the transmission. sometimes happens in 3rd. has never happened w… read more
John
John
MASTER AUTOMOTIVE TECHNICIAN
2 YEARS COLLEGE
9,106 satisfied customers
2003 gmc sierra 2500 hd: speed manual..smooth..shifting..1st gear
My 2003 gmc sierra 2500hd 6.0 liter with 5 speed manual shifts from 2nd to 3rd rather hard it doesn't grind but its not a smooth shift,almost a popping its most prominate when the engine is warm, down… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
95 yukon: auto trans..second gear..throttle and allow it to shift
95 yukon auto trans not shifting into second gear, have to wind it out in first then let off throttle and allow it to shift into third, what could be causing this… read more
Dave Nova
Dave Nova
Auto Dealership Owner
Associate Degree
18,417 satisfied customers
96 suburban: hesitation..3rd gear..automatic transmission..rpms
96 suburban--hesitation in shift from 2nd to 3rd gear in automatic transmission--transmission rebuilt in 2/09--when driving get about to 20 mph then rpms elevate to around 4000-5000 with no increase i… read more
Joe  Barfield
Joe Barfield
Master High-Tech
Master Aamco
1,359 satisfied customers
1500 pickup: rebuilt or new transmission in it..Ran good
I have an 1989 gmc 1500 pickup. It suppose to have either a rebuilt or new transmission in it. Ran good for the 1st 2 weeks. Now when in drive or overdrive the transmission will not shift from 2nd gea… read more
Joe  Barfield
Joe Barfield
Master High-Tech
Master Aamco
1,359 satisfied customers
1994 Chevy 1500 4x4 5.7 Automatic Transmission Why does my
1994 Chevy 1500 4x4 5.7 Automatic Transmission Why does my transmission have no second and 4th gear and will only upshift to 3rd above 20 mph but you must let foot off of the gas pedal, and will coast… read more
RussMasterTech
RussMasterTech
GM Service Technician
3 Years College
546 satisfied customers
I HAVE A 93 GMC HALF TON TRUCK WITH AUTOMATIC TRANSMISSION AND A 4.
I HAVE A 93 GMC HALF TON TRUCK WITH AUTOMATIC TRANSMISSION AND A 4.3 LITER MOTOR THE PROBLEM IM HAVING IT WONT SHIFT INTO OVERDRIVE AND THE PASSING GEAR AINT WORKING BUT IT SHIFTS FINE INTO GEARS… read more
Roy F.
Roy F.
Auto Repair Technician
Vocational, Technical or Trade Scho
114 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

GMC Mechanic

5,987 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

GMC Technician

1,563 satisfied customers

15 years gm master tech/15 years ASE master tech

car tech

car tech

ASE Certified Technician

449 satisfied customers

25 year master tech and shop owner

Chris (aka- Moose)

Chris (aka- Moose)

GMC Technician

330 satisfied customers

24 years of experience diagnosing & repairing

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

211 satisfied customers

ASE Master Tech 20+ Years

Amedee

Amedee

GMC Technician

563 satisfied customers

ASE certified tech with advanced level specialist. Wisconsin certified emissions state inspector

Anthony

Anthony

GMC Technician

489 satisfied customers

GM Certified

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x