How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask car tech Your Own Question
car tech
car tech, ASE Certified Technician
Category: GM
Satisfied Customers: 3332
Experience:  25 year master tech and shop owner
1511099
Type Your GM Question Here...
car tech is online now
A new question is answered every 9 seconds

2005 GMC ENVOY DENALI: FRONT BLOWER FOR HEATING AND A/C SYSTEM

This answer was rated:

2005 GMC ENVOY DENALI SUV
NEED INSTRUCTION ON REMOVAL AND REINSTALLATION OF FRONT BLOWER FOR HEATING AND A/C SYSTEM , PLEASE .
front blower or rear blower
Customer: replied 7 years ago.
FRONT BLOWER AND IT ALSO CONTROLS FRONT AND MIDDLE AIR MOVEMENT , RIGHT ? IF DON'T PLEASE INCLUDE INSTALLATION OF REAR ALSO .

it controls front and middle

 

Blower Motor Replacement

Removal Procedure

  1. Remove the right closeout/insulator panel. .
  2. Remove the I/P storage compartment door. .
    Object Number: 759898  Size: SH

  3. Disconnect the blower motor electrical connector.
  4. Remove the blower motor mounting screws.
  5. Remove the blower motor cooling tube.
  6. Remove the blower motor (2).

Installation Procedure


    Object Number: 759898  Size: SH

  1. Install the blower motor (2).
  2. Install the blower motor cooling tube.

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the blower motor mounting screws.

    Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Connect the blower motor electrical connector.
  5. Install the right closeout/insulator panel. .
car tech and other GM Specialists are ready to help you