GM

GM repair problems? Ask a GM repair expert now.

Connect one-on-one with {0} who will answer your question

Related GM Questions
Heelo. I have a 2004 YUKON DENALI, which we owned since
Hello, I have a 2004 YUKON DENALI, which we owned since brand new. It has been an excellent truck, but now the transmission goes to 1st gear and then to the 3rd. We don't have 2nd or the 4th (OD). The reverse gear works ok, but it takes a few seconds longer than normal to get into the gear. However, we always had the reverse issue and after 50,000 Miles and it has been almost the same. Therefore, I don't think they slipping has much to do with the reverse issu. So, we have 163,000 Mike's on the vehicle. Could this be a fuse or relay problem or do we need to possibly re build the transmission? Thank you for your consideration to answer my question. … read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,156 satisfied customers
2003 yukon transmission worked perfectly befor sitting 3
2003 yukon transmission worked perfectly befor sitting 3 months put a new battery in and topped off the fluids and now my transmission slips after 2nd gear rpms rev high if i let off the gas and allow… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
15,857 satisfied customers
GM Sierra 1500 4x4: 2003 GMC Sierra 1500 4x4. Transmission
2003 GMC Sierra 1500 4x4. Transmission would stick in 2nd gear sometimes and would require high RPM to make the shift to 3rd. That has been intermittent and not often. Seems like I lost 3rd gear today… read more
GM Tech (Cam)
GM Tech (Cam)
GMC Mechanic
Vocational, Technical or Trade Scho
5,987 satisfied customers
2002 GMC Yukon XL. 3rd gear and Drive stopped working. When
2002 GMC Yukon XL. 3rd gear and Drive stopped working. When engaged in Drive, would stop pulling once the SUV got to 20mph. 1st and 2nd gear work fine and there is no noise coming from the transmissio… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
GM 1500 4wdsurban surban: have 1997 gm surban 4wheel dr shifts
have 1997 gm surban 4wheel dr shifts 1 and 2 but not to 3 and odrive happend all of a suden always watch tac when driving never ever notice any varyation when in over drive on cruse control… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
GM Z71 (1500 Serria): I have a 2002 GMC serria Z71 4x4 with
I have a 2002 GMC serria Z71 4x4 with an automatice transmisson. Problem: When shifting from 2nd to 3rd and higher the RPM will surge up to 4000 rmps and i have to let my foot of the gas to get the tr… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
my 2005 yukon xl will not advance when in drive or 3rd gear...
my 2005 yukon xl will not advance when in drive or 3rd gear... but will in 2nd and 1st and reverse. automatic transmission.… read more
Gary
Gary
GMC Technician
Vocational, Technical or Trade Scho
1,563 satisfied customers
1999 gmc yukon: OD..3rd..netural the reverse works..four wheel drive
i have a 1999 gmc yukon denail 5.7 and the transmission works in 2nd and 1st but OD and 3rd the vehicle will not move as it is in netural the reverse works fine 4l60e is the transmission four wheel dr… read more
Joe  Barfield
Joe Barfield
Retired-Disabled
Master Aamco
1,312 satisfied customers
1999 GMC: 4.8 liter, extended cab..automatic transmission..kick
I own a 1999 GMC Sierra, 4.8 liter, extended cab. Not always, but many times during driving, the automatic transmission shifts from 1st to 2nd really hard... it's like it jolts the truck and you can f… read more
John
John
GMC Technician
2 YEARS COLLEGE
9,176 satisfied customers
2003 GMC: liter..Park the indicator shows 3rd gear, but it is..reverse
2003 GMC 2500 6 liter Auto. Sometimes when I put the truck in Park the indicator shows 3rd gear, but it is in park. I move it to reverse and it shows R in nuteral it shows 3rd, in Drive, 3rd and 2nd i… read more
Dave Nova
Dave Nova
Auto Dealership Owner
Associate Degree
18,417 satisfied customers
2002 chev duramax, gear selecter light not working..shifts fine..road
2002 chev duramax, gear selecter light not working properly, but truck shifts fine , will i see problems down the road?… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,730 satisfied customers
1985 gmc: tranny..trans fluid..reverse, neutral, first and second
got a 1985 gmc sierra classic 2500, with a th700r4 tranny. it ran low on trans fluid and i get reverse, neutral, first and second but when i put it in drive it doesnt shiftup to drive, only first and … read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,420 satisfied customers
1995 gmc: pu with a automatic trans..3rd or 4th gear..shifts fine
i have a 1995 gmc 1500 pu with a automatic trans it won,t shift into 3rd or 4th gear, 1st and 2nd shifts fine… read more
Joe  Barfield
Joe Barfield
Retired-Disabled
Master Aamco
1,312 satisfied customers
2004 2500 series: gear ratio for 1st 2nd 3rd 4th and 5th gear
what is the gear ratio for 1st 2nd 3rd 4th and 5th gear for a 2004 2500 series gm pickup with duramax engine and what is the gear ratio for 1st 2nd 3rd 4th 5th and 6th gear for a 2008 2500 series gm p… read more
goodwrench9124
goodwrench9124
Lead Tech/ Shop Leader
Vocational, Technical or Trade Scho
3,392 satisfied customers
2003 gmc sierra 2500 hd: speed manual..smooth..shifting..1st gear
My 2003 gmc sierra 2500hd 6.0 liter with 5 speed manual shifts from 2nd to 3rd rather hard it doesn't grind but its not a smooth shift,almost a popping its most prominate when the engine is warm, down… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
96 suburban: hesitation..3rd gear..automatic transmission..rpms
96 suburban--hesitation in shift from 2nd to 3rd gear in automatic transmission--transmission rebuilt in 2/09--when driving get about to 20 mph then rpms elevate to around 4000-5000 with no increase i… read more
Joe  Barfield
Joe Barfield
Retired-Disabled
Master Aamco
1,312 satisfied customers
1998 Gmc: overdrive..my rpm and speedometer..ignition switch
I have a 1998 Gmc Sierra that is having some transmission problems, sometimes transmission will shift down into 3rd gear and will not shift out..neither up into overdrive nor down into 2nd or 1st...wh… read more
GMTechBernard
GMTechBernard
Owner / Technician
High School or GED
2,157 satisfied customers
I HAVE A 93 GMC HALF TON TRUCK WITH AUTOMATIC TRANSMISSION AND A 4.
I HAVE A 93 GMC HALF TON TRUCK WITH AUTOMATIC TRANSMISSION AND A 4.3 LITER MOTOR THE PROBLEM IM HAVING IT WONT SHIFT INTO OVERDRIVE AND THE PASSING GEAR AINT WORKING BUT IT SHIFTS FINE INTO GEARS… read more
Roy F.
Roy F.
Auto Repair Technician
Vocational, Technical or Trade Scho
114 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

GMC Mechanic

5,987 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

GMC Technician

1,563 satisfied customers

15 years gm master tech/15 years ASE master tech

car tech

car tech

ASE Certified Technician

449 satisfied customers

25 year master tech and shop owner

Chris (aka- Moose)

Chris (aka- Moose)

GMC Technician

330 satisfied customers

24 years of experience diagnosing & repairing

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

211 satisfied customers

ASE Master Tech 20+ Years

Amedee

Amedee

GMC Technician

563 satisfied customers

ASE certified tech with advanced level specialist. Wisconsin certified emissions state inspector

Anthony

Anthony

GMC Technician

489 satisfied customers

GM Certified

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x