How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), GMC Mechanic
Category: GM
Satisfied Customers: 29586
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your GM Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

how do i replace the front pump on a 4l60e transmision

Resolved Question:

how do i replace the front pump on a 4l60e transmision
Submitted: 8 years ago.
Category: GM
Expert:  GM Tech (Cam) replied 8 years ago.
Welcome. To remove the pump you must first take the oil pan off and remove the TCC solenoid that goes into the front pump. To get the bolts out you need to remove the clip and remove the other solenoid under it. Also you need to remove the o-ring from the shaft. To get the pump loose, you can use a long blade screwdriver and gently pry in from the bottom. There is a spot on both sides. Just go very gently and try to pry evenly. YOu may need to get it to move a bit then tap it back down to work it loose.
GM Tech (Cam) and 2 other GM Specialists are ready to help you